Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › New Holland › T6080 › T6080

New Holland T6080 (123 kW)

Built: 2009-2011 · Series: T6080

More machines from model year 2009

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The T6080 series from New Holland includes the T6080. Production: 2009-2011. The engine delivers 155 hp (123 kW), has 6 cylinders, with a displacement of 6,728 cm³. The engine comes from New Holland. Torque is 647 Nm. Rated speed is 2,200 rpm. The machine is 4,560 mm long, 2,520 mm wide and 3,140 mm high. The unladen weight is 7,500 kg. The wheelbase measures 2,734 mm. The tank holds 285 litres. Transmission: 18 V/6 R and 19 V/6 R. The engine is water-cooled. The model was built in England. The gross vehicle weight is 8,000 kg. The fuel is diesel. The linkage is category III. The PTO runs at 540/540E/1000 rpm. The T6080 series covers 5 models. Rated output within it ranges from 100.7 to 123 kW; the T6080 sits at the top of that range with 123 kW. Its immediate neighbours are the T6080 Elite below it with 115.6 kW. Unladen weight within it ranges from 5,600 to 7,500 kg; here the T6080 sits at the top of that range with 7,500 kg. 1448 New Holland models across 71 series are on record.

New Holland T6080 – the range page of the T6000 model from Basildon, base, 4WD and Elite versions, 100.7 to 123 kW, six-cylinder of 6.7 l, 135 hp PTO output

This page gathers the versions of the New Holland T6080, a model of the T6000 range from the Basildon plant in England. The register lists the base version, the four-wheel-drive (4WD) version and the Elite version; the engine comes from New Holland itself.

Read on 3 more paragraphs

The register lists here 5 versions with 100.7 to 123 kW (155 hp) from six-cylinders of 6,700.7 to 6,751.5 cm³ displacement, unladen weights of 5,600 to 7,500 kg and gross weights of 8,000 to 10,500 kg; length ranges from 4,560 to 5,100 mm, width from 2,500 to 2,520 mm at a height of 3,140 mm. Also recorded are a torque of 647 Nm at a rated speed of 2,200 rpm, a PTO output of 135 hp and a lift capacity of 4,363 to 5,539 kg.

The T6080 sits in the mid power class of the T6000 range, which New Holland positioned as the successor to the TM and TS ranges and which is among the brand's best-selling standard tractors in Europe. The T6080 is built in Basildon on the same line as the smaller and larger T6000 models and shares its cab and basic construction with the range's sister models.

On used T6000 models, operating hours, the transmission and electrohydraulics, the condition of the cab mounting, the four-wheel-drive clutch and brakes count, and on the Elite versions the function of the extra equipment; parts run through the CNH network.

Sources: SpecCodex register, model data: New Holland T6080, New Holland Agriculture (manufacturer)

Technical data

Engine

Engine makeNew Hollandcorrect
Fueldieselcorrect
Power155 hp (123 kW)correct
Rated speed2,200 rpmcorrect
Torque647 Nmcorrect
Cylinders6correct
Displacement6,728 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,560 mmcorrect
Width2,520 mmcorrect
Height3,140 mmcorrect
Wheelbase2,734 mmcorrect
Unladen weight7,500 kgcorrect
Gross vehicle weight8,000 kgcorrect

Drivetrain and chassis

Driverear-wheel driveWD/MFWDcorrect
Gearbox18 V/6 R and 19 V/6 Rcorrect

Working data

Fuel tank capacity285 lcorrect

Origin and approval

PlantEnglandcorrect

Other data

Linkage categoryCat IIIcorrect
PTO speed540/540E/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 16.4 kW/t (123 kW / 7.5 t)

Power class: Large (100–180 hp)

Stronger than 87% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland T6080 have?

The New Holland T6080 delivers 155 hp.

How much does the New Holland T6080 weigh?

The unladen weight is 7,500 kg.

What is the gross vehicle weight of the New Holland T6080?

8,000 kg.

What engine does the New Holland T6080 have?

6 cylinders, 6,728 cm³ displacement, Diesel.

What are the dimensions of the New Holland T6080?

4,560 mm × 2,520 mm × 3,140 mm.

When was the New Holland T6080 built?

Production years: 2009-2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare