Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › New Holland › Other models › 8360

New Holland 8360

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland 8360 is a machine built by New Holland. The engine delivers 115 hp (86 kW). The machine is 4,690 mm long, 2,420 mm wide and 2,890 mm high. The wheelbase measures 2,723 mm. Ground clearance is 380 mm. The engine is water-cooled. The model was built in England. The fuel is diesel. The fuel is diesel. Rated output across the New Holland range ranges from 24 to 613 hp; the 8360 sits in the lower part of that range with 115 hp. Its immediate neighbours are the T5070 below it with 113 hp and the TS115A above it with 116 hp. Rated output across the New Holland range ranges from 18 to 457 kW; here the 8360 sits in the lower part of that range with 86 kW. 1448 New Holland models across 71 series are on record.

New Holland – other models: the collective page of tractors outside the named ranges, from the Fiat heritage (80-66, 110-90) through the Ford 40 and 70 series (7740, 8340, 8670) to the 9x82 and T9, 14 to 457 kW, NEF

This page gathers the New Holland tractors the register could not assign to a named range – and it shows the brand's three roots: Fiat of Turin, Ford of Basildon and Versatile of Winnipeg. New Holland, founded in 1895 as a farm-machinery works in Pennsylvania, was joined with Ford Tractor in 1986 into Ford New Holland and bought by Fiat in 1991, which merged with Case as CNH from 1999; the blue tractors of the 1990s therefore carry three type logics. The Fiat types such as 80-66 and 110-90 give the hp class before and the series after the hyphen; the Ford 40 (5640 to 8340) and 70 (8670 to 8970) series from Basildon and Antwerp give the power in the middle digits and the series in the last, with SLE and SL as equipment lines; the articulated 9282 to 9882 and the later T9 come from Winnipeg and Fargo. From 2007 the T logic applies: T4 to T9 as ranges, the following digits as power (T6.140 about 140 hp). The engines are Fiat's 8000 series, Ford's Genesis, FPT's NEF and Cursor and Cummins in the articulated tractors.

Read on 3 more paragraphs

The register lists here 578 versions with 13.8 to 457 kW from three- to six-cylinders of 954 to 15,001 cm³, PTO outputs from 15 to 530 hp, lift capacities from 574 to 8,900 kg, unladen weights from 652 to 25,401 kg, gross weights from 3,000 to 18,000 kg, lengths from 2,700 to 8,005 mm and widths from 1,082 to 4,060 mm.

New Holland is Europe's second-largest tractor brand after John Deere and in the top three in Italy, Spain, France, Britain and Turkey; the brand also carries the specialist tractors from Jesi and the Boomer compact class from Japan.

On used tractors, clutch and shuttle count on Fiat types, electronics and powershift on the Ford 40 and 70 series, transmission and tyres on the articulated tractors, and on the T ranges operating hours, common-rail injection and exhaust aftertreatment; parts run through CNH.

Sources: SpecCodex register, model data: New Holland (weitere Modelle), New Holland Agriculture (manufacturer)

Technical data

Engine

Fueldieselcorrect
Fueldieselcorrect
Power115 hp (86 kW)correct
Rated speed2.200/mincorrect
Cylinders6 Hubraumcorrect
Coolingwater-cooledcorrect
Cooling systemwater-cooledcorrect
Torque rise44, 2 %correct

Dimensions and weights

Length4,690 mmcorrect
Width2,420 mmcorrect
Height2,890 mmcorrect
Wheelbase2,723 mmcorrect
Ground clearance380 mmcorrect

Drivetrain and chassis

Driverear-wheel driveWD/MFWDcorrect
Turning radius5,450 mmcorrect
Drive typeall-wheel drivecorrect

Origin and approval

PlantEnglandcorrect
Production period1,996correct
Type675 Tcorrect
Series/Model8360 Acorrect

Other data

Top speed30 odercorrect

Frequently asked questions

How much power does the New Holland 8360 have?

The New Holland 8360 delivers 115 hp.

What are the dimensions of the New Holland 8360?

4,690 mm × 2,420 mm × 2,890 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 27 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare