New Holland CR 9080 SCR
Series: Mähdrescher / Combine Harvester
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
New Holland Combine Harvester – other models from Zedelgem: from early types to the CX, CS and CR ranges, diesel power, some with Ford engines from the Ford New Holland era
New Holland builds its combine harvesters at the Zedelgem plant in Belgium. This collective page lists versions outside the independently maintained main ranges, from early types such as the 1520 and 1545, through the conventional straw-walker combines of the CX and CS ranges, to the rotary combines of the CR range, including tracked variants marked Tracks. Some of the early models gathered here carry Ford engines, a legacy of the period when New Holland, as Ford New Holland, was part of the Ford group before the brand passed to Fiat and later to CNH Industrial.
Read on 3 more paragraphs
The register lists here 93 versions; one of them is recorded with a Ford diesel engine of 130 kW (175 hp), running on diesel like the other drivetrains covered here.
Combines of the CX, CS and CR ranges rank among the widely used harvesting machines in European arable farming, threshing cereals, oilseed rape and other grain crops; the CR range, with rotary threshing and in part a tracked undercarriage, is built for high throughput and work on heavy or wet soils, while the CX and CS models with straw-walker threshing cover the mid-capacity segment.
On used examples, the condition of the threshing or rotor unit and concaves, the condition of sieves and walkers on the respective designs, wear on chopper knives and the header, engine hours and, on Tracks models, the condition of the rubber tracks all matter; spare parts run through the CNH dealer network.
Sources: Kennwerte der Modelle New Holland Mähdrescher / Combine Harvester (weitere Modelle), New Holland (Hersteller)
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 1 individual figure for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1520
1545
CH7.70 ST5
CR 8070 SCR
CR 8080 SCR
CR 9060 Elevation
CR 9070 Elevation
CR 9070 SCR
CR 9080 Elevation
CR 9090 Elevation
CR 9090 SCR
CR 960 A
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.