New Holland TN 95 DA
Built: 2006–2007 · Series: TN-A
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
New Holland TN-A – compact CNH Industrial range: TN 85 DA/SA and TN 95 DA, 60 to 66 kW / 82 to 90 hp, four-cylinder of 4,485 cm³, 320 to 364 Nm at 2,300 rpm
New Holland is a brand of CNH Industrial, formed in 1999 from the merger of Case IH and New Holland; the TN-A range comprises compact all-purpose tractors of the 2000s, built among other places at the Jesi plant in Italy, continuing the tradition of the compact Ford New Holland tractors. This range includes the TN 85 DA/SA and TN 95 DA models. CNH Industrial brings together New Holland alongside Case IH and Steyr, and the TN-A generation replaced the older TN ranges with an updated cab and engine technology.
Read on 3 more paragraphs
The register lists here 2 versions with 60 to 66 kW, or 82 to 90 hp, from a four-cylinder engine of 4,485 cm³, an unladen weight of 3,050 kg, a length of 3,568 mm, a width of 2,010 mm, a height of 2,340 mm and torque of 320 to 364 Nm at 2,300 rpm.
Tractors of this class serve as all-purpose machines on smaller and medium-sized livestock and arable farms across Europe, with front-loader approval and compact dimensions suited to yard and barn work. Their compact length and manoeuvrability also suit grassland care, yard transport and light municipal work, where larger standard tractors reach their limits.
Buyers of used units should check the hydraulic pump, PTO and clutch, as well as rust on the axle housings and chassis and the electronics in the cab; spares run through the CNH and New Holland dealer network. The condition of the tyres, the trailer hitch and the lighting system is also worth inspecting.
Sources: SpecCodex register, model data: New Holland TN-A, New Holland (CNH Industrial, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 90 hp (66 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 364 Nmcorrect |
| Speed at max. torque | 1,400 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,485 cm³correct |
| Bore | 104 mmcorrect |
| Stroke | 132 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,568 mmcorrect |
|---|---|
| Width | 2,010 mmcorrect |
| Height | 2,340 mmcorrect |
| Wheelbase | 2,185 mmcorrect |
| Ground clearance | 360 mmcorrect |
| Unladen weight | 3,050 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 12V / 12Rcorrect |
| Front tyres | 360/70 R 20correct |
| Rear tyres | 420/70 R 30correct |
| Top speed | 40 km/hcorrect |
Working data
| Fuel tank capacity | 88 lcorrect |
|---|
Other data
| Linkage category | Cat II/Icorrect |
|---|
Where this model stands
Power-to-weight ratio: 21.6 kW/t (66 kW / 3 t)
Power class: Universal (40–100 hp)
Stronger than 60% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the New Holland TN 95 DA have?
The New Holland TN 95 DA delivers 90 hp.
How much does the New Holland TN 95 DA weigh?
The unladen weight is 3,050 kg.
What engine does the New Holland TN 95 DA have?
4 cylinders, 4,485 cm³ displacement, Diesel.
How fast does the New Holland TN 95 DA go?
Top speed is 40 km/h.
What are the dimensions of the New Holland TN 95 DA?
3,568 mm × 2,010 mm × 2,340 mm.
When was the New Holland TN 95 DA built?
Production years: 2006–2007.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
