New Holland (CNH) T9.645 – specifications
Series: Other models
The New Holland (CNH) T9.645 is a machine built by New Holland (CNH). The engine has 6 cylinders, with a displacement of 12,901.5 cm³. The machine is 3,770 mm high. Ground clearance is 447 mm. The engine fitted is the FPT Cursor 13 Two-stage Turbo. 70 New Holland (CNH) models across 5 series are on record.
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
New Holland (CNH) – Tractors at a glance
This page groups 5 Tractors models from New Holland (CNH) that the register does not assign to a named series. Listed in the register: Boomer™ Deluxe CVT 45D*, T9.530, T9.600, T9.645.
Sources: SpecCodex-Register (eigene Daten)
Technical data
Engine
| Engine model | FPT Cursor 13 Two-stage Turbocorrect |
|---|---|
| Cylinders | 6correct |
| Displacement | 12,901.5 cm³correct |
| Aspiration | WTcorrect |
Dimensions and weights
| Height | 3,770 mmcorrect |
|---|---|
| Ground clearance | 447 mmcorrect |
Drivetrain and chassis
| Turning radius | 5,702 mmcorrect |
|---|
Electrical data
| Number of batteries | 2correct |
|---|
Frequently asked questions
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.