Neuson Ecotec TS5221-3
Built: 2015 · Series: Other models
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Neuson Ecotec – other models: the collective page of trailers outside the named ranges, TCH 465 and TS5221-3, 17,500 to 22,870 kg unladen weight, 19,000 to 24,000 kg gross weight
This page gathers the Neuson Ecotec trailers the register could not assign to a named range – with two listed versions this amounts to the whole known programme of the brand. The types TCH 465 and TS5221-3 each carry a number combination, with no consistent system derivable from them. As with many small trailer brands, the values are drawn from registration data, in which each model is listed individually with its technical figures.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 17,500 to 22,870 kg, gross weights from 19,000 to 24,000 kg, lengths from 9,400 to 11,930 mm and a uniform width of 2,550 mm.
With unladen weights of 17.5 to just under 23 tonnes against only slightly higher gross weights, these are heavy trailer chassis with little extra payload reserve, typical when most of the weight is already carried by the body itself; both versions sit well within the heavy trailer class above ten tonnes. At this unladen weight, such chassis are typically run as part of a working equipment fleet rather than as a single privately owned unit.
On a used example in this weight class, axle, brake system and frame condition matter most, along with the function of brake valves and air lines, corrosion on load-bearing parts, and tyre and rim condition. Parts for such a small brand usually run through independent commercial-vehicle workshops rather than a maker's own network.
Sources: SpecCodex register, model data: Neuson Ecotec (weitere Modelle)
Technical data
Dimensions and weights
| Length | 11,930 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,450 mmcorrect |
| Unladen weight | 17,500 kgcorrect |
| Gross vehicle weight | 19,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Neuson Ecotec TS5221-3 weigh?
The unladen weight is 17,500 kg.
What is the gross vehicle weight of the Neuson Ecotec TS5221-3?
19,000 kg.
Up to what speed is the Neuson Ecotec TS5221-3 approved?
Approved up to 100 km/h.
What are the dimensions of the Neuson Ecotec TS5221-3?
11,930 mm × 2,550 mm.
When was the Neuson Ecotec TS5221-3 built?
Production years: 2015.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
