Neoplan NH16
Built: 1972 · Series: Other models
More machines from model year 1972
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Neoplan – further models: the collection page of the Stuttgart bus builder beyond the named ranges, from the N208 minibus to the N516 SHD double-decker, 2,384 to 14,620 cm³, up to 25,000 kg gross weight
This page brings together Neoplan vehicles not assigned to any named range. Neoplan was founded in Stuttgart in 1935 by Gottlob Auwärter and ranks among the traditional German bus builders; the models appear in the vehicle registers as trucks because buses fall there under the heavy commercial vehicle class. In the type designation, N stands for Neoplan and the following number for the series – N208 as a minibus, N516 SHD as a double-decker touring coach (Super-Hoch-Doppeldecker) – while NL marks low-floor city buses such as the N116-NL.
Read on 3 more paragraphs
The register lists ten versions with six- to eight-cylinder engines displacing 2,384 to 14,620 cm³. Kerb weights range from 3,750 to 16,250 kg, gross vehicle weights from 4,500 to 25,000 kg, lengths from 6,390 to 12,000 mm and widths from 2,350 to 2,500 mm, a spread running from a compact minibus to a large double-decker.
For decades Neoplan ranked among the most innovative European bus makers and, with models such as the double-decker Skyliner and the Spaceliner, shaped the image of the long-distance coach. The vehicles gathered here show the breadth of the marque, from city and minibuses to touring and double-decker coaches for long-distance service.
When buying used double-deckers, the seals of the large glazed areas and the condition of the staircase structure deserve particular attention, as does corrosion of the floor and wheel arches. As with any coach, the engine, gearbox and brakes should be checked for oil leaks and even braking, and on low-floor models the kneeling system as well. Parts for the engine and drivetrain are usually still available through the independent bus parts trade, while body and interior parts are often only obtainable from salvage or by special order.
Sources: SpecCodex register, model data: Neoplan (weitere Modelle)
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 5,750 mmcorrect |
| Unladen weight | 15,070 kgcorrect |
| Gross vehicle weight | 16,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Neoplan NH16 weigh?
The unladen weight is 15,070 kg.
What is the gross vehicle weight of the Neoplan NH16?
16,000 kg.
What engine does the Neoplan NH16 have?
6 cylinders.
When was the Neoplan NH16 built?
Production years: 1972.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.