Nefra FIAT DUCATO
Built: 2019 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat Ducato as a single model: four-cylinder diesel at 2,287 cc and 6,500 kg gross weight on a reinforced chassis – a base for a special body in class N2
The Ducato is Fiat's large van range, serving for decades as a chassis for independent body-builders as well, for instance motorhomes, ambulances and car transporters. For bodies with a higher gross weight, Fiat also offers the Ducato in a reinforced chassis version.
Read on 3 more paragraphs
The four-cylinder diesel engine, at 2,287 cc, drives a vehicle 9.23 m long and 2.40 m wide, on a 6.00 m wheelbase with six wheels, meaning twin rear tyres. It weighs 4,285 kg unladen and is rated for 6,500 kg gross weight, giving around 2,215 kg of payload.
At 6,500 kg the vehicle sits above the 3.5-tonne threshold for light commercial vehicles and falls into EU class N2 for trucks between 3.5 and 12 tonnes, which requires at least a category C1 licence. The considerable length of 9.23 m on a Ducato chassis points to a long body, of the kind used for car transporters or other bulky loads.
On a used example of this kind it is worth checking the mounting points between chassis and the long body for sagging and corrosion, the brakes given the overall length, and the twin rear tyres, where a flat inner tyre is easy to miss. Service history of the diesel engine and the availability of spare parts, which is good for the widely used Ducato, deserve the same attention, along with the condition of the ramps, winches or tie-down points fitted to the body for whatever it is built to carry.
Sources: SpecCodex-Register: Kennwerte des Modells Fiat Ducato, Fiat Professional (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,287 cm³correct |
Dimensions and weights
| Length | 9,230 mmcorrect |
|---|---|
| Width | 2,400 mmcorrect |
| Wheelbase | 6,000 mmcorrect |
| Unladen weight | 4,285 kgcorrect |
| Gross vehicle weight | 6,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Nefra FIAT DUCATO weigh?
The unladen weight is 4,285 kg.
What is the gross vehicle weight of the Nefra FIAT DUCATO?
6,500 kg.
What engine does the Nefra FIAT DUCATO have?
4 cylinders, 2,287 cm³ displacement.
What are the dimensions of the Nefra FIAT DUCATO?
9,230 mm × 2,400 mm.
When was the Nefra FIAT DUCATO built?
Production years: 2019.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
