Start › Trailers › Nc Engineering › O4DA3

Nc Engineering O4DA3

Built: 2021-2021 · Series: Other models

Source: https://www.nc-engineering.com/items/nc-semi-trailers/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The O4DA3 comes from Nc Engineering. Production: 2021. The machine is 15,400 mm long and 2,550 mm wide. The unladen weight is 8,715 kg. The gross vehicle weight is 48,000 kg. Unladen weight across the Nc Engineering range ranges from 4,400 to 10,240 kg; the O4DA3 sits in the upper part of that range with 8,715 kg. Its immediate neighbours are the NC below it with 8,525 kg and the Step Frame above it with 8,730 kg. 7 Nc Engineering models are on record. The model is listed under Trailers. 5 verified figures from 1 source are on file.

Technical data

Dimensions and weights

Length15,400 mmcorrect
Width2,550 mmcorrect
Unladen weight8,715 kgcorrect
Gross vehicle weight48,000 kgcorrect

Frequently asked questions

How much does the Nc Engineering O4DA3 weigh?

The unladen weight is 8,715 kg.

What is the gross vehicle weight of the Nc Engineering O4DA3?

48,000 kg.

What are the dimensions of the Nc Engineering O4DA3?

15,400 mm × 2,550 mm.

When was the Nc Engineering O4DA3 built?

Production years: 2021.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

4-axle Full-trailer

Centre Axle

NC

SYD1238

Step Frame

TRIDEM CENTRE AXLE TRAILER

TRIDEM CENTRE AXLE TRAILER

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare