Nc Engineering 4-axle Full-trailer
Built: 2018 · Series: Other models
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
NC Engineering – other models: the collective page of trailers outside the named ranges, Centre Axle, Step Frame and Tridem Centre Axle Trailer, 4,400 to 10,240 kg unladen weight, 18,000 to 48,000 kg gross weight
This page gathers the trailers of the Irish maker NC Engineering the register could not assign to a named range. Rather than type codes, most entries carry descriptive English build names such as Centre Axle, Step Frame, 4-axle Full-trailer and Tridem Centre Axle Trailer, which name the axle configuration directly. As with many small trailer brands, the values are drawn from registration data, in which each model is listed individually with its technical figures.
Read on 3 more paragraphs
The register lists here versions with unladen weights from 4,400 to 10,240 kg, gross weights from 18,000 to 48,000 kg, lengths from 9,621 to 15,400 mm and widths from 2,540 to 2,836 mm.
With gross weights of 18 to 48 tonnes and lengths from just under 9.6 to over 15 metres, the programme sits in the range of multi-axle tandem and tridem trailers for heavy-duty transport, used to carry construction and earth-moving machinery behind tractor units; the Centre Axle and Tridem configurations named in the types match this use.
On a used example in this weight class, axle, brake system and frame condition matter most, along with the function of brake valves and air lines, corrosion on load-bearing parts, and tyre and rim condition; on the long versions, the frame's torsional stiffness and the condition of ramps or the load area are also worth checking. Parts for such a small maker usually run through independent commercial-vehicle workshops rather than a maker's own network.
Sources: SpecCodex register, model data: NC Engineering (weitere Modelle)
Technical data
Dimensions and weights
| Length | 14,160 mmcorrect |
|---|---|
| Width | 2,541 mmcorrect |
| Unladen weight | 10,240 kgcorrect |
| Gross vehicle weight | 38,000 kgcorrect |
Frequently asked questions
How much does the Nc Engineering 4-axle Full-trailer weigh?
The unladen weight is 10,240 kg.
What is the gross vehicle weight of the Nc Engineering 4-axle Full-trailer?
38,000 kg.
What are the dimensions of the Nc Engineering 4-axle Full-trailer?
14,160 mm × 2,541 mm.
When was the Nc Engineering 4-axle Full-trailer built?
Production years: 2018.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.