Muller Mitteltal T3
Built: 1994 · Series: Other models
More machines from model year 1994
Müller-Mitteltal – other models: the collective page of low-loaders outside the named ranges, from the T3 Kompakt to the T4 Kompakt 40.0, 2.5 to 9.5 t unladen weight, 8.6 to 40 t gross weight
This page gathers the Müller-Mitteltal low-loaders the register could not assign to a named range – trailers for transporting construction machinery, built in the Black Forest village of Mitteltal. The type codes T3 and T4 give the axle count, the following number the payload class in tonnes (T3 Kompakt 30.0 for around 30 t, T4 Kompakt 40.0 for around 40 t), Kompakt and Profi mark short and better-equipped versions respectively.
Read on 3 more paragraphs
The register lists here 23 versions with unladen weights from 2,450 to 9,500 kg, gross weights from 8,600 to 40,000 kg, lengths from 5,450 to 12,200 mm and widths from 2,170 to 2,550 mm.
Low-loaders of this class transport excavators, wheel loaders and rollers between building sites and are the workhorse of plant-hire firms and civil-engineering contractors; the compact versions serve operations with smaller machines, the long ones with a deep loading well heavy crawlers and cranes. Being based in the Black Forest village of Mitteltal, the maker knows local customers' requirements, reflected in the wide choice of lengths and payloads in the range.
On used low-loaders, the condition of the loading well and ramps, axles and brakes, the condition of the lashing points and, on hydraulically lowering versions, the deck-lowering hydraulics count; rust on frame and ramps is the costliest finding. Parts for axles and brakes run through the open trailer parts trade, for the lowering technology through the manufacturer.
Sources: SpecCodex register, model data: Müller-Mitteltal (weitere Modelle)
Technical data
Dimensions and weights
| Length | 8,930 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Gross vehicle weight | 30,000 kgcorrect |
Frequently asked questions
What is the gross vehicle weight of the Muller Mitteltal T3?
30,000 kg.
What are the dimensions of the Muller Mitteltal T3?
8,930 mm × 2,550 mm.
When was the Muller Mitteltal T3 built?
Production years: 1994.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
EAL-TA
EAL-TA-F
EAL-TA-P 10,5
EDU-TA
ETUE-TA-R 14,4
ETUE-TA-R 19,0
KA-TA-R 14,4
KWH 8,8 ML
MITTELTAL
MTP
PT 30.0 PROFI
PT200PROF
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
