Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Müller › Other models › TAM-120

Müller TAM-120

Series: Other models

The photo shows the TM 31 from the same series. Source: https://www.tractordata.com/farm-tractors/008/8/1/8817-mulle

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TAM-120 comes from Müller. The engine comes from Deutz. The engine is water-cooled. The model was built in Brazil. The fuel is diesel. 27 Müller models across 6 series are on record.

Technical data

Engine

Engine makeDeutzcorrect
Fueldieselcorrect
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivefour-wheel driveWDcorrect

Origin and approval

PlantBrazilcorrect

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare