Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Mtz › BELARUS › BELARUS 1221.3

Mtz BELARUS 1221.3

Built: 2005-2006 · Series: BELARUS

More machines from model year 2005

Source: kronos5.ru

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mtz BELARUS 1221.3 is a model in the BELARUS series. Production: 2005-2006. The engine delivers 97 kW, has 6 cylinders, with a displacement of 7,120 cm³. The machine is 4,640 mm long and 2,550 mm wide. The unladen weight is 5,200 kg. The gross vehicle weight is 8,000 kg. The BELARUS series covers 5 models. Rated output within it ranges from 59 to 97 kW; the BELARUS 1221.3 sits at the top of that range with 97 kW. Its immediate neighbours are the BELARUS 1025.3 below it with 77 kW. Unladen weight within it ranges from 4,480 to 6,160 kg; here the BELARUS 1221.3 sits in the middle of that range with 5,200 kg. 5 Mtz models are on record.

MTZ Belarus 920 to 1222 tractors from Minsk: type number by horsepower class, .3 modernisation stage, 59 to 97 kW from four- and six-cylinder engines, 4,480 to 6,160 kg unladen weight

The Minsk Tractor Works (MTZ) has built tractors under the Belarus brand in the Belarusian capital Minsk since 1946 and ranks among the largest tractor manufacturers in the world, exporting to numerous countries across Eastern Europe, Asia and Africa. The type numbers 920, 952, 1025, 1221 and 1222 traditionally follow MTZ's approximate horsepower class of the fitted engine, while the .3 suffix marks the third modernisation stage of the given model relative to earlier versions of the same range.

Read on 3 more paragraphs

The register lists here five versions with 59 to 97 kW engine output from four- and six-cylinder engines of 4,750 to 7,120 cm3 displacement. Unladen weight ranges from 4,480 to 6,160 kg, permissible gross weight from 7,000 to 8,000 kg, overall length from 4,580 to 4,870 mm and width up to 2,550 mm.

Belarus tractors are widespread across Eastern Europe, the Commonwealth of Independent States and numerous developing markets as a robust, mechanically simple alternative to Western European brands. The power band of these five models covers the middle ground between a compact yard tractor and a heavy field tractor, aimed at operations that depend on low purchase and repair costs.

On a used purchase, the condition of the hydraulics and lift linkage, the tightness of the axles and gearbox, rust on the frame, and the operating hours and service history of the injection pump all count. The brand's wide presence across Eastern Europe provides comparatively good parts availability even outside official channels, while electronics and cab equipment are kept simpler than on Western competitor models.

Sources: SpecCodex register, model data: Mtz BELARUS, MTZ (Minsker Traktorenwerk, Hersteller)

Technical data

Engine

Power97 kWcorrect
Cylinders6correct
Displacement7,120 cm³correct

Dimensions and weights

Length4,640 mmcorrect
Width2,550 mmcorrect
Unladen weight5,200 kgcorrect
Gross vehicle weight8,000 kgcorrect

Where this model stands

Power-to-weight ratio: 18.7 kW/t (97 kW / 5.2 t)

Power class: Large (100–180 hp)

Stronger than 78% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mtz BELARUS 1221.3 have?

The Mtz BELARUS 1221.3 delivers 97 kW.

How much does the Mtz BELARUS 1221.3 weigh?

The unladen weight is 5,200 kg.

What is the gross vehicle weight of the Mtz BELARUS 1221.3?

8,000 kg.

What engine does the Mtz BELARUS 1221.3 have?

6 cylinders, 7,120 cm³ displacement.

What are the dimensions of the Mtz BELARUS 1221.3?

4,640 mm × 2,550 mm.

When was the Mtz BELARUS 1221.3 built?

Production years: 2005-2006.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare