Montenegro RPV-3GC
Built: 2012 · Series: Other models
More machines from model year 2012
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Montenegro – other models: the collective page for Spanish semi-trailers outside the named ranges, the SPD, RCHT and RP/CH ranges, 3.6 to 12.9 t unladen weight, up to 42 t gross vehicle weight
This page brings together the Montenegro trailers that the register could not assign to a named range. The model name SEMIRREMOLQUE, Spanish for semi-trailer, and the IBERICA suffix point to the Spanish market; type codes such as SPD-2G-13.62, RCHT-2GC-7.40, RP/CH-3G/3S-C and SVF-2G/2S denote different axle and body configurations of these semi-trailers.
Read on 3 more paragraphs
The register lists 12 versions here with unladen weights from 3,640 to 12,870 kg, gross vehicle weights from 16,000 to 42,000 kg, lengths from 6,620 to 14,000 mm and widths from 2,450 to 2,550 mm.
Semi-trailers in this weight class form the backbone of road haulage on the Iberian peninsula and are used by hauliers for general freight, bulk goods and special loads; the range of two- to three-axle configurations allows the trailer to be matched to different payloads and axle-load requirements. The wide length span, from 6,620 to 14,000 mm, mirrors the gap between a short semi-trailer for compact loads and a long platform for bulky goods.
When buying used, check the kingpin and fifth-wheel plate for wear, the axle assemblies and brake system, the frame for distortion and cracks, particularly under high axle loads, the air suspension and its bellows, and, depending on the body, the side panels or tarpaulin. On imported vehicles, valid documents and current inspection dates in the country of registration also need clarifying.
Sources: SpecCodex register, model data: Montenegro
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Unladen weight | 7,840 kgcorrect |
| Gross vehicle weight | 24,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Montenegro RPV-3GC weigh?
The unladen weight is 7,840 kg.
What is the gross vehicle weight of the Montenegro RPV-3GC?
24,000 kg.
Up to what speed is the Montenegro RPV-3GC approved?
Approved up to 100 km/h.
When was the Montenegro RPV-3GC built?
Production years: 2012.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
