Mk Maschinen MINI-KIPPER 1700 E
Built: 2024 · Series: Other models
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mini-Kipper 1700 E: a compact tipper body with 1,285 kg of payload at just 1,315 kg kerb weight and a speed limited to 20 km/h
This vehicle is a compact tipper body for construction site use, not a transporter in the road-traffic sense. Its small size and heavily restricted speed point to a work machine for short trips on building sites or in farming.
Read on 3 more paragraphs
At a 1,315 kg kerb weight and a 2,600 kg gross vehicle weight, 1,285 kg of payload is available — almost the vehicle's own weight again as cargo, which is typical of a tipper for hauling loose material. At 3,150 mm long, 1,270 mm wide and with a wheelbase of only 1,490 mm, the vehicle is built very compact, while the top speed of 20 km/h shows it is designed not for general road traffic but for short trips within a work area.
Vehicles with a design top speed of 20 km/h do not fall under the usual rules for motor vehicles in public road traffic, but are operated as self-propelled work machines. The tipper body allows loose material such as soil, sand or gravel to be dumped directly at the point of use, without having to be reloaded by hand.
When buying a small used tipper, the condition of the tipping mechanism and hydraulics matters most: leaks at the hydraulic cylinders and uneven tipping behaviour are common signs of wear. The load bed itself should also be checked for corrosion and deformation caused by sharp-edged loose material, as should the tyres, which see heavier use under constant site work than in normal road operation.
Sources: SpecCodex-Register: Kennwerte des Modells MINI-KIPPER 1700 E
Technical data
Dimensions and weights
| Length | 3,150 mmcorrect |
|---|---|
| Width | 1,270 mmcorrect |
| Wheelbase | 1,490 mmcorrect |
| Unladen weight | 1,315 kgcorrect |
| Gross vehicle weight | 2,600 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 20 km/hcorrect |
Frequently asked questions
How much does the Mk Maschinen MINI-KIPPER 1700 E weigh?
The unladen weight is 1,315 kg.
What is the gross vehicle weight of the Mk Maschinen MINI-KIPPER 1700 E?
2,600 kg.
How fast does the Mk Maschinen MINI-KIPPER 1700 E go?
Top speed is 20 km/h.
What are the dimensions of the Mk Maschinen MINI-KIPPER 1700 E?
3,150 mm × 1,270 mm.
When was the Mk Maschinen MINI-KIPPER 1700 E built?
Production years: 2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
