Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Mitsubishi › CANTER › Canter FB634

Mitsubishi Canter FB634

Built: 2003 · Series: CANTER

More machines from model year 2003

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mitsubishi Canter FB634 belongs to the CANTER series. Production: 2003. The engine delivers 92 kW, has 4 cylinders, with a displacement of 2,978.5 cm³. The vehicle is 6,000 mm long and 2,180 mm wide. The unladen weight is 2,800 kg. The gross vehicle weight is 3,500 kg. The gearbox offers 5 gears. The CANTER series covers 22 models. Unladen weight within it ranges from 2,135 to 3,380 kg; the Canter FB634 sits in the middle of that range with 2,800 kg. Its immediate neighbours are the CANTER 3C13N 30 below it with 2,795 kg and the CANTER FUSO 6C18 above it with 2,960 kg. 1264 Mitsubishi models across 48 series are on record.

Mitsubishi Canter – the Japanese light truck up to 3.5 tonnes: four-cylinder engines of 2.8 to 4.9 litres, the Fuso range since 1963, box, dropside and panel bodies

This page gathers versions of the Mitsubishi Canter, the Japanese light truck Mitsubishi has built since 1963 and which, after the truck and bus division was spun off in 2003, trades under the Fuso brand, majority-owned by Daimler since 2003. The Canter belongs to the world's best-selling class of trucks up to 3.5 tonnes gross vehicle weight and, besides Japan, is also built in Portugal, Indonesia, Taiwan and China. Model suffixes such as ALU, ISO and OLB denote different body and chassis variants for box, container and dropside vehicles, FUSO the models after the brand change.

Read on 3 more paragraphs

The register lists 22 versions from four-cylinders of 2,835 to 4,899 cm³ with a gross vehicle weight of 3,500 kg throughout, unladen weights from 2,135 to 3,380 kg and widths from 2,080 to 2,550 mm.

The Canter is common in urban distribution traffic, with tradespeople and as the basis for box bodies, refrigerated bodies and dropsides with a tail lift; in this class it competes with the Iveco Daily, the Nissan Cabstar and Isuzu's light models.

On used examples, rust on chassis and load bed, the condition of clutch and gearbox, the mileage of the robust diesel engine, brakes and, on bodies with a tail lift, its hydraulics count; parts run through the dense Fuso and Mitsubishi network.

Sources: SpecCodex register, model data: Mitsubishi CANTER, Mitsubishi Fuso (manufacturer)

Technical data

Engine

Power92 kWcorrect
Cylinders4correct
Displacement2,978.5 cm³correct

Dimensions and weights

Length6,000 mmcorrect
Width2,180 mmcorrect
Unladen weight2,800 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Gears5correct

Where this model stands

Power-to-weight ratio: 32.9 kW/t (92 kW / 2.8 t)

Stronger than 57% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mitsubishi Canter FB634 have?

The Mitsubishi Canter FB634 delivers 92 kW.

How much does the Mitsubishi Canter FB634 weigh?

The unladen weight is 2,800 kg.

What is the gross vehicle weight of the Mitsubishi Canter FB634?

3,500 kg.

What engine does the Mitsubishi Canter FB634 have?

4 cylinders, 2,978 cm³ displacement.

What are the dimensions of the Mitsubishi Canter FB634?

6,000 mm × 2,180 mm.

When was the Mitsubishi Canter FB634 built?

Production years: 2003.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare