Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Mikes Garage › LOAD RUNNER 2

Mikes Garage LOAD RUNNER 2

Built: 1991 · Series: Other models

More machines from model year 1991

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mikes Garage LOAD RUNNER 2 is a machine built by Mikes Garage. Production: 1991. The engine has 4 cylinders. The machine is 1,770 mm wide. The unladen weight is 1,780 kg. The wheelbase measures 3,790 mm. The gross vehicle weight is 2,800 kg. The machine runs on 6 wheels. Unladen weight within this group ranges from 74.2 to 23,550 kg; the LOAD RUNNER 2 sits at the bottom of that range with 1,780 kg. Its immediate neighbours are the ABT e-Caddy below it with 1,779 kg and the PICK UP-1500 above it with 1,781 kg. Gross vehicle weight within this group ranges from 540 to 48,000 kg; here the LOAD RUNNER 2 sits at the bottom of that range with 2,800 kg.

Load Runner 2 light commercial body with a four-cylinder engine, six wheels and 1,020 kg of payload at a 2,800 kg gross vehicle weight

The figures for this vehicle mainly allow the vehicle class to be identified: it is a light commercial vehicle with six wheels, of the kind built for smaller transport tasks requiring extra payload.

Read on 3 more paragraphs

The four-cylinder engine powers a vehicle with a 1,780 kg kerb weight, which allows 1,020 kg of payload at a gross vehicle weight of 2,800 kg. A 3,790 mm wheelbase with a width of 1,770 mm produces a narrow but long chassis. Six wheels instead of the usual four point to twin tyres on the rear axle, spreading the payload of just over a tonne across a larger contact area and so lowering the ground pressure per tyre.

Vehicles with twin rear tyres are typical of light commercial vehicles regularly loaded close to their gross vehicle weight, such as flatbed vehicles for construction or farming businesses. The extra wheels improve driving stability under full load, but also increase overall tyre wear, since all six tyres need regular replacement.

When buying a used vehicle with twin tyres, the condition of all six wheels should be checked individually, since uneven wear between the inner and outer rear tyres can point to a bent axle. The load bed itself also deserves close inspection for deformation and rust damage caused by persistently heavy loading.

Sources: SpecCodex-Register: Kennwerte des Modells LOAD RUNNER 2

Technical data

Engine

Cylinders4correct

Dimensions and weights

Width1,770 mmcorrect
Wheelbase3,790 mmcorrect
Unladen weight1,780 kgcorrect
Gross vehicle weight2,800 kgcorrect

Drivetrain and chassis

Wheels6correct

Frequently asked questions

How much does the Mikes Garage LOAD RUNNER 2 weigh?

The unladen weight is 1,780 kg.

What is the gross vehicle weight of the Mikes Garage LOAD RUNNER 2?

2,800 kg.

What engine does the Mikes Garage LOAD RUNNER 2 have?

4 cylinders.

When was the Mikes Garage LOAD RUNNER 2 built?

Production years: 1991.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare