Merlo TF 35.7-120 G
Series: Merlo Telescopic Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Merlo TF 35.7-120 G is a telehandler from the Merlo Telescopic Forklift series. The four-cylinder engine produces 90 kW.
It will not go faster than 40 km/h — a working pace, not a travelling one.
Within the range, rated power spans from 55 to 170 kW; with 90 kW, the TF 35.7-120 G sits in the mid-field. Directly alongside are the TF 50.8 T CS-156 CVT with 85.8 kW below and the TF 38.10 -120 with 91 kW above.
Technical data
Engine
| Engine make | Kubotacorrect |
|---|---|
| Power | 90 kWcorrect |
| Cylinders | 4correct |
Dimensions and weights
| Height | 2,250 mmcorrect |
|---|
Drivetrain and chassis
| Top speed | 40.1 km/hcorrect |
|---|
Working data
| Lifting capacity | 3,500 kgcorrect |
|---|---|
| Lift height | 6,700 mmcorrect |
Frequently asked questions
How much power does the Merlo TF 35.7-120 G have?
The Merlo TF 35.7-120 G delivers 90 kW.
What engine does the Merlo TF 35.7-120 G have?
4 cylinders.
How fast does the Merlo TF 35.7-120 G go?
Top speed is 40.1 km/h.
What is the load capacity of the Merlo TF 35.7-120 G?
Load capacity is 3,500 kg, lift height 6,700 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
27.8
29.6
30.6 Classic2
30.6 Top2
30.9 Classic2
30.9 Top2
38.14
38.14S
38.16
38.16S
45.19MCSS
45.21MCSS
Sources: [1]
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.