Merlo ROTO 38.16 S – specifications
Series: Merlo Teleskopstapler-Rotor
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Working data
| Lifting capacity | 3,800 kgcorrect |
|---|---|
| Lift height | 15,740 mmcorrect |
| Mast type | telescopiccorrect |
Frequently asked questions
Used listings – figures from public listings
Between April and November 2026, speccodex recorded 12 public used-machine listings for Merlo ROTO 38.16 S on 3 platforms. Asking prices ranged from €32,500 to €69,900 (median €38,950), years of manufacture between 2007 and 2018.
Operating hours stated in the listings (median) by machine age: 8–12 years: 2,809 h (3 listings); over 12 years: 5,131 h (7 listings).
Offered among others in Germany (27%), Austria (18%) and France (18%); shares refer to listings that state a location.
Asking prices are sellers' demands, not achieved sale prices. Basis: public listings, recorded and analysed by speccodex. As of: 22 Nov 2026. Sellers usually do not state whether prices are net or gross.
How much does a used Merlo ROTO 38.16 S cost? Asking prices from public listings
Area: Machines › Materials handling › Telehandlers
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 3 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: forklift-international.com (retrieved August 2026) · Data sources and cross-checks
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.