Mercedes Sprinter/kegger
Built: 2020 · Series: Other models
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mercedes-Benz Sprinter as a single model: six-cylinder diesel at 2,987 cc, 3,500 kg gross weight and six wheels – a chassis with a special body geared for 100 km/h
The Sprinter is Mercedes-Benz's large van range, used by numerous independent converters as a base for panel van, crew-cab and special-purpose bodies.
Read on 3 more paragraphs
The six-cylinder diesel engine, at 2,987 cc, is the strongest unit offered on the Sprinter. The vehicle weighs 2,680 kg unladen and is rated for 3,500 kg gross weight, giving around 820 kg of payload, at 7.88 m long, 2.05 m wide and on a 4.33 m wheelbase with six wheels, meaning twin rear tyres. Top speed is 100 km/h.
At 3,500 kg gross weight the vehicle stays within EU class N1 for light commercial vehicles and can be driven on a category B licence. The combination of twin rear wheels, considerable length and the strongest available engine alongside a limited payload is typical of Sprinter chassis carrying a special body with substantial kerb weight of its own, which claims a large share of the permitted gross weight itself.
On a used Sprinter chassis of this kind it is worth checking the mounting points between chassis and body for corrosion, the brakes, and the twin rear tyres, where a flat inner tyre is easy to miss. Service history of the six-cylinder diesel together with its exhaust after-treatment and the tightness of the body deserve the same attention as the condition of cabling and connections fitted for the special body.
Sources: SpecCodex-Register: Kennwerte des Modells Mercedes-Benz Sprinter
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 2,987 cm³correct |
Dimensions and weights
| Length | 7,880 mmcorrect |
|---|---|
| Width | 2,050 mmcorrect |
| Wheelbase | 4,330 mmcorrect |
| Unladen weight | 2,680 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Mercedes Sprinter/kegger SPRINTER/ KEGGER weigh?
The unladen weight is 2,680 kg.
What is the gross vehicle weight of the Mercedes Sprinter/kegger SPRINTER/ KEGGER?
3,500 kg.
What engine does the Mercedes Sprinter/kegger SPRINTER/ KEGGER have?
6 cylinders, 2,987 cm³ displacement.
How fast does the Mercedes Sprinter/kegger SPRINTER/ KEGGER go?
Top speed is 100 km/h.
What are the dimensions of the Mercedes Sprinter/kegger SPRINTER/ KEGGER?
7,880 mm × 2,050 mm.
When was the Mercedes Sprinter/kegger SPRINTER/ KEGGER built?
Production years: 2020.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
