Mercedes Benz/nps SPRINTER
Built: 2022-2026 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mercedes-Benz Sprinter chassis with a four-cylinder diesel engine and 1.95-litre displacement: 3,500 kg gross vehicle weight at 2,425 kg kerb weight and 7,550 mm body length
This version, too, is based on the Mercedes-Benz Sprinter chassis, which serves converters across Europe as the basis for their own bodies. The vehicle manufacturer supplies the engine, running gear and cab, while the load bed or box body comes from the respective converter and does not necessarily say anything about the origin of the rest of the vehicle.
Read on 3 more paragraphs
The four-cylinder diesel engine has a displacement of 1,950 cm³ and reaches a top speed of 160 km/h. At a kerb weight of 2,425 kg and a gross vehicle weight of 3,500 kg, 1,075 kg of payload is available. At 7,550 mm long, 2,100 mm wide and with a 4,330 mm wheelbase, the body is long and narrow, typical of box vans with high load volume that prioritise usable interior length over extra width.
At a gross vehicle weight of 3,500 kg, the vehicle falls into EU category N1 and can be driven on a category B licence. The small four-cylinder engine paired with this vehicle weight means the payload is used to the full in everyday operation; the engine is geared towards economy in distribution traffic rather than performance.
When buying a used vehicle with such a long box body, the condition of the load compartment floor matters most: corrosion often develops at the mounting points of shelving systems or partitions. A test drive with a realistic load is also worthwhile, to check whether the suspension and brakes still feel adequately sized for the full payload of close to a tonne.
Sources: SpecCodex-Register: Kennwerte des Modells SPRINTER
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,950 cm³correct |
Dimensions and weights
| Length | 7,550 mmcorrect |
|---|---|
| Width | 2,100 mmcorrect |
| Wheelbase | 4,330 mmcorrect |
| Unladen weight | 2,425 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 160 km/hcorrect |
Frequently asked questions
How much does the Mercedes Benz/nps SPRINTER weigh?
The unladen weight is 2,425 kg.
What is the gross vehicle weight of the Mercedes Benz/nps SPRINTER?
3,500 kg.
What engine does the Mercedes Benz/nps SPRINTER have?
4 cylinders, 1,950 cm³ displacement.
What are the dimensions of the Mercedes Benz/nps SPRINTER?
7,550 mm × 2,100 mm.
When was the Mercedes Benz/nps SPRINTER built?
Production years: 2022-2026.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
