Mercedes Benz/mrauto SPRINTER
Built: 2024 · Series: Other models
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mercedes-Benz Sprinter from 2024: a 1,950 cm³ engine, twin rear tyres, a gross weight of 3,500 kg and a payload of around 1,020 kg.
This Sprinter from 2024 is one of the many versions of the series with a gross weight of 3,500 kg, typical for operation on a category B licence. Six wheels with twin tyres on the rear axle indicate a version geared towards stability rather than top speed.
Read on 3 more paragraphs
A four-cylinder engine with a displacement of 1,950 cm³ drives a vehicle with an unladen weight of 2,480 kg and a gross weight of 3,500 kg, giving a payload of around 1,020 kg. With a length of 7,150 mm, a width of 2,210 mm and a wheelbase of 4,330 mm, this is a mid-length version within the series.
Twin rear tyres on a vehicle with a gross weight of only 3.5 tonnes increase standing stability and resistance to tipping under uneven loading, which matters especially with tall box bodies. For distribution transport over short to medium distances, a vehicle of this configuration is a typical working version.
When buying used, it is worth checking the twin tyres for even wear of both wheels on each side, since a punctured or underinflated single tyre is easily overlooked in this arrangement. Equally important are the load-bed floor and doors for tightness, and the common-rail diesel engine for oil consumption after commercial use. The condition of the wheel bearings on the twin-tyred rear axle is also worth checking, since uneven wear there is easy to miss during a quick inspection.
Sources: SpecCodex-Register: Kennwerte des Modells Mercedes-Benz Sprinter, Mercedes-Benz (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,950 cm³correct |
Dimensions and weights
| Length | 7,150 mmcorrect |
|---|---|
| Width | 2,210 mmcorrect |
| Wheelbase | 4,330 mmcorrect |
| Unladen weight | 2,480 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 90 km/hcorrect |
Frequently asked questions
How much does the Mercedes Benz/mrauto SPRINTER weigh?
The unladen weight is 2,480 kg.
What is the gross vehicle weight of the Mercedes Benz/mrauto SPRINTER?
3,500 kg.
What engine does the Mercedes Benz/mrauto SPRINTER have?
4 cylinders, 1,950 cm³ displacement.
How fast does the Mercedes Benz/mrauto SPRINTER go?
Top speed is 90 km/h.
What are the dimensions of the Mercedes Benz/mrauto SPRINTER?
7,150 mm × 2,210 mm.
When was the Mercedes Benz/mrauto SPRINTER built?
Production years: 2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
