Technical register for agricultural, construction and commercial machinery · sourced data

Mercedes Benz 7.49T

Built: 2005-2006 · Series: Atego

More machines from model year 2005

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mercedes Benz 7.49T belongs to the Atego series. Production: 2005-2006. The engine delivers 120 kW, has 4 cylinders, with a displacement of 4,249 cm³. The machine is 8,065 mm long and 2,550 mm wide. The unladen weight is 5,225 kg. The gross vehicle weight is 7,490 kg. The Atego series covers 293 models. Rated output within it ranges from 90 to 220 kW; the 7.49T sits in the lower part of that range with 120 kW. Its immediate neighbours are the 816L-8.6 below it with 115 kW and the ATEGO 1217 above it with 125 kW. Unladen weight within it ranges from 4,250 to 16,554 kg; here the 7.49T sits at the bottom of that range with 5,225 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Atego – distribution truck since 1998 between 6.5 and 26 tonnes: type number built from weight class and horsepower, four-cylinder OM904 and six-cylinder OM906 engines, 90 to 220 kW

The Atego arrived in 1998 as the mid-range series between the light Vario and the heavy Actros, and has since covered the distribution and municipal-vehicle class from roughly 6.5 to 26 tonnes; facelifts followed in 2004 and 2013 with new cabs and emission stages. The four-digit type number follows Mercedes' factory standard: the first one or two digits give the weight class in tonnes, the last two roughly the output in horsepower divided by ten – a 1224 stands for about 12 t and roughly 240 hp. L marks, under factory naming, the standard chassis, AF four-wheel drive, NR a special-equipment version; the number after the slash (e.g. /42 or /4760) refers to wheelbase or frame length.

Read on 3 more paragraphs

The register lists 293 versions with 90 to 220 kW output, displacements of 4,200 to 7,698 cm³ (four-cylinder OM904 and six-cylinder OM906) across 4 to 6 cylinders, unladen weights of 4,250 to 16,554 kg, gross weights of 6,500 to 26,500 kg and lengths of 5,750 to 11,970 mm.

The Atego is the classic distribution truck for city logistics, refrigerated transport, furniture and beverage delivery, and fire-service and municipal bodies; it competes with the MAN TGL/TGM, DAF LF, Volvo FL/FE and Iveco Eurocargo.

On used examples, check rust on the frame and body mounting points, condition of clutch and gearbox (Telligent shift on later models), brake system and ABS/ASR, sealing of the cab mounts, and operating hours on municipal and refrigerated bodies, which often run well ahead of pure mileage.

Sources: Kennwerte der Modelle Mercedes-Benz Atego, Mercedes-Benz Trucks (Hersteller)

Technical data

Engine

Power120 kWcorrect
Cylinders4correct
Displacement4,249 cm³correct

Dimensions and weights

Length8,065 mmcorrect
Width2,550 mmcorrect
Unladen weight5,225 kgcorrect
Gross vehicle weight7,490 kgcorrect

Where this model stands

Power-to-weight ratio: 23 kW/t (120 kW / 5.2 t)

Stronger than 11% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz 7.49T have?

The Mercedes Benz 7.49T delivers 120 kW.

How much does the Mercedes Benz 7.49T weigh?

The unladen weight is 5,225 kg.

What is the gross vehicle weight of the Mercedes Benz 7.49T?

7,490 kg.

What engine does the Mercedes Benz 7.49T have?

4 cylinders, 4,249 cm³ displacement.

What are the dimensions of the Mercedes Benz 7.49T?

8,065 mm × 2,550 mm.

When was the Mercedes Benz 7.49T built?

Production years: 2005-2006.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare