Menke & Janzen DA40
Built: 2013 · Series: Other models
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Menke & Janzen – other models: the collective page of livestock and low-loader trailers outside the named ranges, tridem trailers, gross weights 3,500 to 45,000 kg, lengths up to 16,100 mm
This collective page gathers the Menke & Janzen models the register could not assign to a named range. Two model names state the purpose directly: MENKE-JANZEN VIEHTRANSPORTER and VEETRANSPORTER, Dutch for livestock transporter, mark trailers for moving cattle; a further model carries the designation TRIDEM AANHANGER, Dutch for a three-axle trailer, and one model is named 4 ACHS TIEFLADE for a four-axle low-loader. The GFA2500 model and the RUHOLT name round out the collection with further, separately named variants.
Read on 3 more paragraphs
The register lists here 11 versions with unladen weights from 1,470 to 16,720 kg, gross weights from 3,500 to 45,000 kg, lengths from 8,110 to 16,100 mm and widths from 2,480 to 2,550 mm.
The collection combines two uses from agriculture and heavy haulage: livestock trailers carry cattle and other farm animals between holdings, markets and abattoirs, while the tridem and four-axle low-loaders transport machinery and special loads; both body types share multi-axle chassis for high payload and, on the low-loaders, beds reaching up to 16.1 metres.
On a used livestock trailer, the condition of the vent slats, the floor covering and the partition gates and the seal against moisture count; on the low-loaders, the condition of ramps, frame and hydraulics; on all versions, axles, brakes and even tyre wear across the multiple axles should be checked, and on livestock trailers the floor should also be checked for odour and corrosion left by manure.
Sources: SpecCodex register, model data: Menke & Janzen (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,850 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 15,225 kgcorrect |
| Gross vehicle weight | 40,000 kgcorrect |
Frequently asked questions
How much does the Menke & Janzen DA40 weigh?
The unladen weight is 15,225 kg.
What is the gross vehicle weight of the Menke & Janzen DA40?
40,000 kg.
What are the dimensions of the Menke & Janzen DA40?
13,850 mm × 2,550 mm.
When was the Menke & Janzen DA40 built?
Production years: 2013.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
4 ACHS TIEFLADE
AVT
DA-RH-30
GFA2500
MENKE
MENKE-JANZEN VIEHTRANSPORTER
Menke-Janzen
RUHOLT
TRIDEM AANHANGER
VEETRANSPORTER
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.