MEC 3772ES HD – specifications
Series: MEC Scissor Lift
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The 3772ES HD is an electric scissor lift manufactured by MEC as part of the MEC Scissor Lift series. This model belongs to the aerial work platform category and follows the American type designation logic, where the digits indicate the platform height in feet and the width in inches. The ES designation identifies it as an electric indoor lift, while the HD suffix indicates the heavy-duty variant with increased load capacity. MEC positions itself as a North American manufacturer focusing on robust and repair-friendly designs for rental fleets.
Technically, the machine is defined by a platform capacity of 340 kg, which allows for the use of two persons including tools. The platform extension of 1,220.2 mm extends the horizontal reach without compromising stability. With an empty weight of 3,626 kg and a ground clearance of 240 mm, the lift is designed for flat indoor surfaces. The maximum speed of 4.8 km/h and a turning radius of 4,330 mm allow for precise maneuvering in confined warehouses. The lifting time of 40 s and lowering time of 38 s ensure rapid height changes, while the 48 V battery system with 8 cells and 350 Ah capacity provides the necessary energy for the electric drive.
Within the MEC Scissor Lift series, the 3772ES HD ranks 7th out of 18 models in terms of empty weight. The next smaller model is the 3072RT at 3,329 kg, and the next larger model is the 3772RT at 3,856 kg. The weight is practically identical to that of the 3772ES and 2591RT models. The range of empty weights across the entire series spans from 1,224.7 to 4,670 kg.
MEC scissor lifts 1532ES to 4191RT – the Californian lift builder from Kerman: the number as platform height in feet and width in inches, ES for Electric Scissor, RT for Rough Terrain with Kubota dual-fuel engine
MEC Aerial Work Platforms of Kerman in California's San Joaquin Valley is, alongside Genie, JLG, Skyjack and Snorkel, the fifth North American maker of scissor lifts – in business since the 1970s and aimed at rental fleets looking for simple, repair-friendly lifts. The type logic follows the American convention: the first digits give the platform height in feet, the last the platform width in inches – a 1532ES is 15 ft high and 32 in wide, a 2647ES 26 ft and 47 in, a 4191RT 41 ft and 91 in – ES stands for the electric indoor lift (Electric Scissor), RT for the rough-terrain lift with all-wheel drive and combustion engine, HD for the heavy-duty version with higher capacity. The RT models run on the Kubota DF752 dual-fuel engine burning petrol and LPG, as the register notes; the ES models run on battery.
Read on 3 more paragraphs
The register lists 18 versions with service weights from 1,225 to 4,670 kg, lengths from 1,830 to 3,660 mm and widths from 810 to 2,310 mm.
MEC is a niche supplier focused on North America; its argument against the big names is simple electrics and hydraulics, valued by rental companies with their own workshop. In Europe MEC lifts are rare.
On used lifts, operating hours, battery condition on ES models, play in scissor pins and rails, hydraulic tightness, the function of tilt and overload sensors, on RT models the Kubota engine and gas system and a valid periodic inspection count; parts run through MEC dealers and Kubota.
Sources: SpecCodex register, model data: MEC Scherenbühnen, MEC Aerial Work Platforms (Hersteller, Kerman, Kalifornien)
Technical data
Dimensions and weights
| Length | 2,980 mmcorrect |
|---|---|
| Width | 1,830 mmcorrect |
| Ground clearance | 240 mmcorrect |
| Unladen weight | 3,626 kgcorrect |
| Platform length | 2,790.2 mmcorrect |
Drivetrain and chassis
| Tyre size | 26x12D-380 NHScorrect |
|---|---|
| Top speed | 4.8 km/hcorrect |
| Turning radius | 4,330 mmcorrect |
Working data
| Lift time | 40 scorrect |
|---|---|
| Lowering time | 38 scorrect |
| Platform extension | 1,220.2 mmcorrect |
| Platform capacity | 340 kgcorrect |
Electrical data
| Battery capacity | 350 Ahcorrect |
|---|---|
| Number of batteries | 8correct |
Other data
| System voltage | 48 Vcorrect |
|---|
Frequently asked questions
How much does the MEC 3772ES HD weigh?
The unladen weight is 3,626 kg.
What are the dimensions of the MEC 3772ES HD?
2,980 mm × 1,830 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Telescopic platform in 3D section
Turn the model, look inside and click an assembly — each one is explained.
