MEC 2633ES – specifications
Series: MEC Scissor Lift
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The 2633ES is an electric scissor lift manufactured by MEC as part of the MEC Scissor Lift series. As a model within the ES series, it is designed for indoor use. The model designation follows American convention, where the initial digits indicate the platform height in feet and the final digits specify the platform width in inches. The unit belongs to the aerial work platform category and targets users requiring a compact lift for indoor operations.
Technically, the drive system is based on a 24-volt electrical system with four batteries and a capacity of 220 Ah. The maximum travel speed is 4.8 km/h, which is designed for safe maneuvering in enclosed spaces. With a net weight of 1,737 kg and a ground clearance of 89.2 mm, the unit is intended for level surfaces. The platform length is 2,310.1 mm, supplemented by a 1,060.2 mm extension, which increases the reach for maintenance work. The platform load capacity is limited to 227 kg. The solid, non-marking tires in size 16x5 protect sensitive floors from abrasion marks.
Within the series, the 2633ES ranks 15th out of 18 models with its net weight of 1,737 kg. The next smaller model is the 1932ES at 1,375 kg, while the next larger model is the 2047ES at 2,019 kg. The weight is practically identical to that of the 2033ES model. The range of net weights across the entire series spans from 1,224.7 to 4,670 kg. This classification indicates that the model is positioned in the lower to mid-weight range of electric scissor lifts, which facilitates transport and handling.
MEC scissor lifts 1532ES to 4191RT – the Californian lift builder from Kerman: the number as platform height in feet and width in inches, ES for Electric Scissor, RT for Rough Terrain with Kubota dual-fuel engine
MEC Aerial Work Platforms of Kerman in California's San Joaquin Valley is, alongside Genie, JLG, Skyjack and Snorkel, the fifth North American maker of scissor lifts – in business since the 1970s and aimed at rental fleets looking for simple, repair-friendly lifts. The type logic follows the American convention: the first digits give the platform height in feet, the last the platform width in inches – a 1532ES is 15 ft high and 32 in wide, a 2647ES 26 ft and 47 in, a 4191RT 41 ft and 91 in – ES stands for the electric indoor lift (Electric Scissor), RT for the rough-terrain lift with all-wheel drive and combustion engine, HD for the heavy-duty version with higher capacity. The RT models run on the Kubota DF752 dual-fuel engine burning petrol and LPG, as the register notes; the ES models run on battery.
Read on 3 more paragraphs
The register lists 18 versions with service weights from 1,225 to 4,670 kg, lengths from 1,830 to 3,660 mm and widths from 810 to 2,310 mm.
MEC is a niche supplier focused on North America; its argument against the big names is simple electrics and hydraulics, valued by rental companies with their own workshop. In Europe MEC lifts are rare.
On used lifts, operating hours, battery condition on ES models, play in scissor pins and rails, hydraulic tightness, the function of tilt and overload sensors, on RT models the Kubota engine and gas system and a valid periodic inspection count; parts run through MEC dealers and Kubota.
Sources: SpecCodex register, model data: MEC Scherenbühnen, MEC Aerial Work Platforms (Hersteller, Kerman, Kalifornien)
Technical data
Dimensions and weights
| Length | 2,490 mmcorrect |
|---|---|
| Width | 840 mmcorrect |
| Ground clearance | 89.2 mmcorrect |
| Unladen weight | 1,737 kgcorrect |
| Platform length | 2,310.1 mmcorrect |
Drivetrain and chassis
| Tyre size | 16x5correct |
|---|---|
| Tyre type | Solid, non-markingcorrect |
| Top speed | 4.8 km/hcorrect |
| Turning radius | 2,240 mmcorrect |
Working data
| Hydraulic oil capacity | 11.4 lcorrect |
|---|---|
| Platform extension | 1,060.2 mmcorrect |
| Platform capacity | 227 kgcorrect |
Electrical data
| Battery capacity | 220 Ahcorrect |
|---|---|
| Number of batteries | 4correct |
Other data
| System voltage | 24 Vcorrect |
|---|
Used listings – figures from public listings
Between July and September 2026, speccodex recorded 3 public used-machine listings for MEC 2633ES on 2 platforms. Asking prices ranged from €3,900 to €6,533 (median €3,900), year of manufacture 2008.
Operating hours stated in the listings (median) by machine age: over 12 years: 397 h (3 listings).
Asking prices are sellers' demands, not achieved sale prices. Basis: public listings, recorded and analysed by speccodex. As of: 11 Nov 2026. Sellers usually do not state whether prices are net or gross.
Frequently asked questions
How much does the MEC 2633ES weigh?
The unladen weight is 1,737 kg.
What are the dimensions of the MEC 2633ES?
2,490 mm × 840 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Telescopic platform in 3D section
Turn the model, look inside and click an assembly — each one is explained.
