McCormick X5.35

Series: X5

Source: https://www.technikboerse.com/gebraucht/traktor-357/mccormic

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the X5.35, McCormick offers a model from the X5 series. The engine delivers 99 hp (73 kW), has 4 cylinders, with a displacement of 3,600 cm³. Rated speed is 2,200 rpm. The machine is 4,408 mm long, 1,900 mm wide and 2,615 mm high. The unladen weight is 3,800 kg. The wheelbase measures 2,355 mm. Ground clearance is 350 mm. Top speed is 40 km/h. Lifting capacity is 4,500 kg. The engine is water-cooled. The fuel is diesel. The X5 series covers 4 models. Rated output within it ranges from 75 to 99 hp; the X5.35 sits at the top of that range with 99 hp. Its immediate neighbours are the X5.30 below it with 95 hp. Unladen weight within it ranges from 3,700 to 4,000 kg; here the X5.35 sits in the lower part of that range with 3,800 kg. 381 McCormick models across 40 series are on record.

McCormick X5 – mid-range tractor from Fabbrico: X5.085 to X5.35 with a four-cylinder diesel, 3.4 to 3.6-litre displacement and 56 to 73 kW

The McCormick X5 is a mid-range series from the Italian Argo group, which has built tractors under the McCormick brand at the Fabbrico plant near Reggio Emilia since 2013. The four models X5.085, X5.100, X5.30 and X5.35 all carry a four-cylinder diesel engine; the digits after the dot denote different power steps of the same base model within the series.

Read on 3 more paragraphs

The register lists 4 versions with 56 to 73 kW (75 to 99 hp) from four-cylinders with 3,400 to 3,600 cm³ displacement. Unladen weights range from 3,700 to 4,000 kg, heights from 2,485 to 2,623 mm. Lengths range from 4,160 to 4,408 mm.

The X5 positions itself as a versatile yard and field tractor for small and medium-sized farms as well as municipal and contracting use, competing directly with series of similar power class from Landini, Deutz-Fahr and New Holland. It is used mainly for tillage, sowing, transport work and powering trailed harvesting machinery.

When buying used, the operating hours on the four-cylinder, the condition of the lift hydraulics and PTO, and the tightness of engine and transmission all matter. Spare parts run through the Argo group's dealer network, which also includes Landini alongside McCormick. It is also worth checking the on-board electronics, cab mounting and seat suspension, and tyre tread depth.

Sources: SpecCodex register, model data: McCormick X5, McCormick (Argo Tractors, Hersteller)

Technical data

Engine

Fuel	dieselcorrect
Power	99 hp (73 kW)correct
Rated speed	2,200 rpmcorrect
Cylinders	4correct
Displacement	3,600 cm³correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	4,408 mmcorrect
Width	1,900 mm (minimum)correct
Height	2,615 mmcorrect
Wheelbase	2,355 mmcorrect
Ground clearance	350 mmcorrect
Unladen weight	3,800 kgcorrect

Drivetrain and chassis

Top speed	40 km/hcorrect

Working data

Lifting capacity	4,500 kgcorrect

Where this model stands

Power-to-weight ratio: 19.2 kW/t (73 kW / 3.8 t)

Power class: Universal (40–100 hp)

Stronger than 65% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the McCormick X5.35 have?

The McCormick X5.35 delivers 99 hp.

How much does the McCormick X5.35 weigh?

The unladen weight is 3,800 kg.

What engine does the McCormick X5.35 have?

4 cylinders, 3,600 cm³ displacement, Diesel.

How fast does the McCormick X5.35 go?

Top speed is 40 km/h.

How much does the rear linkage of the McCormick X5.35 lift?

The rear linkage lifts 4,500 kg.

What are the dimensions of the McCormick X5.35?

4,408 mm × 1,900 mm × 2,615 mm.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →