Start › Tractors › McCormick › X2 › X2.30

McCormick X2.30

Built: Year not documented · Series: X2

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The X2.30 from McCormick is part of the X2 series. The engine delivers 47.5 hp (35 kW), has 4 cylinders, with a displacement of 2,189 cm³. Rated speed is 2,800 rpm. The machine is 3,225 mm long, 1,383 mm wide and 2,307 mm high. The unladen weight is 1,460 kg. The wheelbase measures 1,760 mm. Ground clearance is 385 mm. Top speed is 30 km/h. The tank holds 40 litres. The engine is water-cooled. Tyres: front 260/70R16, rear 320/70R24. The fuel is diesel. Construction: Standardtraktor. There are also 12 reverse gears. Rated output across the McCormick range ranges from 8.1 to 230 hp; the X2.30 sits in the lower part of that range with 47.5 hp. Its immediate neighbours are the SUPER-BMD below it with 47 hp and the CT47HST above it with 47.7 hp. Rated output across the McCormick range ranges from 8.1 to 230 hp; here the X2.30 sits in the lower part of that range with 47.5 hp. 381 McCormick models across 40 series are on record.

McCormick X2.30 of the X2 series: a water-cooled four-cylinder diesel tractor producing 35 kW (47.5 hp), an unladen weight of 1,460 kg, with a design top speed of 30 km/h.

The X2.30 belongs to the X2 series from the Italian McCormick brand, marketed by the ARGO Group (also the owner of Landini). Like other small McCormick series under around 50 kW, this class is built under a manufacturing partnership with the Indian maker TAFE.

Read on 3 more paragraphs

The X2.30 is powered by a water-cooled four-cylinder diesel engine with 2,189 cm3 displacement, producing 35 kW (47.5 hp) at a rated speed of 2,800 rpm. At an unladen weight of 1,460 kg, a wheelbase of 1,760 mm and a width of 1,383 mm, it is a compact tractor standing 2,307 mm tall and measuring 3,225 mm in length. Its design top speed is 30 km/h.

With a four-cylinder diesel engine and around 35 kW, the X2.30 sits in the lower mid-range of general-purpose tractors used on smaller holdings, for grassland work and for trailer transport. The 30 km/h top speed reflects the base specification without a fast road gear and is sufficient for travel between yard and field.

When buying a used X2.30, check the cooling system, since the four-cylinder engine sits in a compact engine bay only a little over two metres tall. Also inspect the clutch and gearbox for wear from frequent manoeuvring given the short wheelbase, along with the hydraulic couplings and seals, which are among the most common weak points on older tractors in this power class after years of daily use.

Sources: SpecCodex-Register: Kennwerte des Modells McCormick X2.30

Technical data

Engine

Fuel	dieselcorrect
Power	47.5 hp (35 kW)correct
Rated speed	2,800 rpmcorrect
Cylinders	4correct
Displacement	2,189 cm³correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	3,225 mmcorrect
Width	1,383 mmcorrect
Height	2,307 mmcorrect
Wheelbase	1,760 mmcorrect
Ground clearance	385 mmcorrect
Unladen weight	1,460 kgcorrect

Drivetrain and chassis

Drive	four-wheel drivecorrect
Reverse gears	12correct
Front tyres	260/70R16correct
Rear tyres	320/70R24correct
Top speed	30 km/hcorrect

Working data

Fuel tank capacity	40 lcorrect

Origin and approval

Construction	Standardtraktorcorrect

Where this model stands

Power-to-weight ratio: 24 kW/t (35 kW / 1.5 t)

Power class: Universal (40–100 hp)

Stronger than 32% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the McCormick X2.30 have?

The McCormick X2.30 delivers 47.5 hp.

How much does the McCormick X2.30 weigh?

The unladen weight is 1,460 kg.

What engine does the McCormick X2.30 have?

4 cylinders, 2,189 cm³ displacement, Diesel.

How fast does the McCormick X2.30 go?

Top speed is 30 km/h.

What are the dimensions of the McCormick X2.30?

3,225 mm × 1,383 mm × 2,307 mm.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.