McCormick X10.35H
Built: 2011–2014 · Series: X10
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
McCormick X10.35H of the X10 series: a compact three-cylinder diesel tractor producing 25 kW (34 hp), an unladen weight of 1,412 kg, built 2011 to 2014, with front hydraulics lifting up to 800 kg.
The X10 series comprises compact models from the Italian McCormick brand, marketed by the ARGO Group; tractors in this power class are built under a manufacturing partnership with the Indian maker TAFE. The X10.35H, produced from 2011 to 2014, is the small three-cylinder version of the series.
Read on 3 more paragraphs
The X10.35H is powered by a three-cylinder diesel engine with 1,600 cm3 displacement, producing 25 kW (34 hp) at a rated speed of 2,600 rpm. At an unladen weight of 1,412 kg, a wheelbase of 1,670 mm and a width of 1,380 mm, it is a very compact tractor standing 2,450 mm tall and measuring 3,100 mm in length. The front hydraulics lift up to 800 kg.
With under 30 kW of power and its tight outer dimensions, the X10.35H belongs to the compact tractor class used for grounds maintenance, small and medium-sized holdings, and orchard or vineyard work, where narrow row spacing and a small turning circle matter. The small-displacement three-cylinder engine is tuned for low fuel use under partial load rather than for high drawbar pull in soil cultivation.
On a used X10.35H, check the front hydraulics and their couplings, since the 800 kg lift capacity is quickly used up with a front loader or mower fitted regularly. Because of the short wheelbase, look for wear in the steering and front-axle bearings, which carry more load through tight turns. The three-cylinder engine is worth assessing for cold-start behaviour and radiator condition, as a compact engine bay leaves less cooling reserve.
Sources: SpecCodex-Register: Kennwerte des Modells McCormick X10.35H
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 34 hp (25 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,600 cm³correct |
Dimensions and weights
| Length | 3,100 mmcorrect |
|---|---|
| Width | 1,380 mmcorrect |
| Height | 2,450 mmcorrect |
| Wheelbase | 1,670 mmcorrect |
| Ground clearance | 350 mmcorrect |
| Unladen weight | 1,412 kgcorrect |
Drivetrain and chassis
| Gearbox | Hydrostatcorrect |
|---|
Working data
| Lifting capacity | 800 kgcorrect |
|---|
Where this model stands
Power-to-weight ratio: 17.7 kW/t (25 kW / 1.4 t)
Power class: Compact (< 40 hp)
Stronger than 20% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the McCormick X10.35H have?
The McCormick X10.35H delivers 34 hp.
How much does the McCormick X10.35H weigh?
The unladen weight is 1,412 kg.
What engine does the McCormick X10.35H have?
3 cylinders, 1,600 cm³ displacement, Diesel.
How much does the rear linkage of the McCormick X10.35H lift?
The rear linkage lifts 800 kg.
What are the dimensions of the McCormick X10.35H?
3,100 mm × 1,380 mm × 2,450 mm.
When was the McCormick X10.35H built?
Production years: 2011–2014.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.