Mazda B2500 2.5TD
Built: 2002 · Series: B2500
More machines from model year 2002
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Mazda B2500 2.5 TD is a pickup truck; built in 2002. The Mazda B2500 is the Mazda version of a pickup developed together with Ford; its sister model is the Ford Ranger. Displacement is 2,500 cm³, which sets how much air and fuel is burned per working cycle. The stated output is 80 kW, which governs drawbar pull, implement choice and driving performance. The gearbox has 5 forward speeds. Dimensions: length 5,100 mm and width 1,660 mm. They determine storage space, transport width and manoeuvrability. Kerb weight is 1,840 kg and permissible gross weight 2,950 kg; the difference is the available payload.
Pickups with an open cargo bed and diesel engine serve as working vehicles on building sites, in farming, forestry and trades. With four-wheel drive they handle farm tracks and loose ground, and the towing capacity allows hauling equipment and boats. The ratio of kerb weight to permissible gross weight shows how much load the vehicle may carry; wheelbase and length decide cargo bed length and turning circle. The values on this page allow comparison with other pickups of this class.
Mazda B2500 – the pick-up twinned with the Ford Ranger: 2.5-litre turbodiesel at 80 kW, Double Cab and 4x4 versions, unladen weight up to 1.8 tonnes, gross weight up to 2.95 tonnes
The Mazda B2500 is a pick-up series built in close technical kinship with the Ford Ranger; the number 2500 denotes the 2.5-litre turbodiesel that powers every version in this collection. DOUBLE CAB denotes the four-door crew cab, 4X4 the selectable four-wheel drive, and the appended letter-number codes such as UN8242 the chassis and equipment variant from vehicle registration. The B series traces back to Mazda's pick-up tradition of the 1960s and formed the technical basis for Ford's Ranger models outside North America across several generations.
Read on 3 more paragraphs
The register lists here 10 versions with 80 kW from the 2.5-litre turbodiesel four-cylinder, unladen weights from 1,715 to 1,840 kg, gross weights from 2,855 to 2,950 kg, lengths from 5,010 to 5,150 mm and widths from 1,660 to 1,700 mm.
The B2500 stood in Europe alongside the near-identical Ford Ranger as a working pick-up for trades and agriculture, and with its 2.5-litre turbodiesel was one of the most tractive engines in its class, also sought as a high-payload tow vehicle.
On used examples, the condition of the turbocharger and injection pump, rust on the load bed and frame, the function of the transfer case on 4x4 versions, and the clutch and brakes all count, along with the rear leaf springs and the load-bed liner; parts run through both Mazda and Ford dealers.
Sources: SpecCodex register, model data: Mazda B2500, Mazda Motor Corporation (manufacturer)
Technical data
Engine
| Power | 80 kWcorrect |
|---|---|
| Displacement | 2,500 cm³correct |
Dimensions and weights
| Length | 5,100 mmcorrect |
|---|---|
| Width | 1,660 mmcorrect |
| Unladen weight | 1,840 kgcorrect |
| Gross vehicle weight | 2,950 kgcorrect |
Drivetrain and chassis
| Gears | 5correct |
|---|
Where this model stands
Power-to-weight ratio: 43.5 kW/t (80 kW / 1.8 t)
Stronger than 41% of the vans in the register — out of 7,144 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mazda B2500 2.5TD have?
The Mazda B2500 2.5TD delivers 80 kW.
How much does the Mazda B2500 2.5TD weigh?
The unladen weight is 1,840 kg.
What is the gross vehicle weight of the Mazda B2500 2.5TD?
2,950 kg.
What engine does the Mazda B2500 2.5TD have?
2,500 cm³ displacement.
What are the dimensions of the Mazda B2500 2.5TD?
5,100 mm × 1,660 mm.
When was the Mazda B2500 2.5TD built?
Production years: 2002.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
B2500
B2500 4X4/300
B2500 DOUBLE CAB
B2500 MC-F TD 4WD
B2500 PICKUP 2.5TD-4-UN82
B2500 PICKUP 2.5TD-4-UN8242-4X4/300
B2500 PICKUP 2.5TD-UN8242-4X4/300
B2500 PICKUP 2.5TD-UN8B42-4X4/300
B2500 PICKUP 2.5TD-UN8F42-4X4/300
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
