Start › Asphalt pavers › Mauldin › 1550C

Mauldin 1550C

Series: Mauldin Asphalt Paver

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mauldin Asphalt Paver series from Mauldin includes the 1550C. The engine delivers 44.7 kW, has 4 cylinders. The tank holds 49.2 litres. The hydraulic tank holds 58.7 litres. The electrical system runs on 12 V. Rated output across the Mauldin range ranges from 13.4 to 59.7 kW; the 1550C sits in the upper part of that range with 44.7 kW. Its immediate neighbours are the 4700 below it with 13.4 kW and the 1750C above it with 59.7 kW. 8 Mauldin models across 4 series are on record. The model is listed under Road construction. 5 verified figures from 1 source are on file.

Technical data

Engine

Power	44.7 kWcorrect
Cylinders	4correct

Drivetrain and chassis

System voltage	12 Vcorrect

Working data

Hydraulic oil capacity	58.7 lcorrect
Fuel tank capacity	49.2 lcorrect

Frequently asked questions

How much power does the Mauldin 1550C have?

The Mauldin 1550C delivers 44.7 kW.

What engine does the Mauldin 1550C have?

4 cylinders.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →