Mastexplorer H60DA
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Mastexplorer H60DA is a forklift truck made by Mastexplorer. Engine output is 74.6 kW.
Operating weight comes to 7,715 kg. It carries 6,000 kg.
Within the range, rated power spans from 26.8 to 74.6 kW; with 74.6 kW, the H60DA sits at the top. Below it ranks the H40DA with 47 kW.
Mastexplorer H15D to H70D – other forklifts of the register: 26.8 to 74.6 kW, 1,360.8 to 7,000 kg lift capacity, Perkins engines
This page gathers the Mastexplorer forklifts the register could not assign to a named range – from the H15D at the lower to the H70DA at the upper end of the range. The number in the type code gives roughly the lift capacity in tonnes, D marks the diesel drive of all the models listed here. They are powered by Perkins diesel engines of the 404C, 804C and 1104C series.
Read on 3 more paragraphs
The register lists here 10 versions with 26.8 to 74.6 kW and lift capacities from 1,360.8 to 7,000 kg. Unladen weights range from 3,099.9 to 7,915 kg and overall widths from 1,380 to 1,980 mm; all ten models run diesel engines.
The range covers, with this span, the entire field from light warehouse forklifts to heavy trucks for container and bulk-goods handling, making it typical of fleets working both indoors and outdoors on building sites and in ports. The three Perkins series each cover their own power class, from the compact three-cylinder to the four-cylinder turbo of the heaviest models. This span matches the typical offering of volume forklift makers, who cover both the warehouse and construction markets with a single engine programme.
On used diesel forklifts of this class, operating hours and the condition of the Perkins engine, the tightness of mast and hydraulic cylinders, fork carriage and chain tension and tyre condition count; parts run through the open forklift and Perkins trade.
Sources: Kennwerte der Modelle Mastexplorer (weitere Modelle)
Technical data
Engine
| Engine model | 1104C.44Tcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 74.6 kWcorrect |
Dimensions and weights
| Width | 1,980 mmcorrect |
|---|---|
| Ground clearance | 365.3 mmcorrect |
| Unladen weight | 7,715 kgcorrect |
Drivetrain and chassis
| Turning radius | 3,700 mmcorrect |
|---|---|
| Mast stages | 2correct |
Working data
| Lifting capacity | 6,000 kgcorrect |
|---|---|
| Lift height | 4,000 mmcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Load centre | 500.1 mmcorrect |
| Rear wheels | 2correct |
More machines with this engine (Perkins 1104C-44T, 81)
Where this model stands
Power-to-weight ratio: 9.7 kW/t (75 kW / 7.7 t)
Stronger than 96% of the forklift trucks in the register — out of 316 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mastexplorer H60DA have?
The Mastexplorer H60DA delivers 74.6 kW.
How much does the Mastexplorer H60DA weigh?
The unladen weight is 7,715 kg.
What is the load capacity of the Mastexplorer H60DA?
Load capacity is 6,000 kg at a 500 mm load centre, lift height 4,000 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.