Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Massey Ferguson › Other models › MF 375

Massey Ferguson MF 375

Series: Other models

Source: mfipk.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The MF 375 is a tractor from Massey Ferguson. It belongs to the manufacturer’s tractor line and runs at a rated speed of 2 200 U/min. The power unit is a four‑cylinder engine with a displacement of 3 863 cm³. Overall dimensions are 3 888 mm in length, 1 980 mm in width and 2 645 mm in height. Transmission options include 8V/2R, 12V/4R and 12V/12R. The maximum road speed is 30 km/h, the fuel tank holds 108 l and the lift capacity falls into category Cat I/II. The drawbar speed is 540/1000 U/min.

The engine delivers a torque of 234 Nm, providing steady traction for field operations. The available gearboxes allow fine tuning of speed and drawbar pull, with the 12‑gear versions especially useful when load conditions vary. A top speed of 30 km/h enables rapid movement between work sites, while the 108‑liter tank supports extended periods of operation without frequent refuelling. The Cat I/II lift rating accommodates implements that match the typical range for tractors of this size.

The MF 375 is suited for tasks that require a balance of pulling power and travel speed. It is appropriate for soil preparation, sowing, harvesting and for pulling implements that fall within the Cat I/II lift class. With its transmission choices, the machine can handle both precise field work and on‑farm transport of loads.

Massey Ferguson – other models: the collective page of tractors outside the named ranges, from the MF 35 and 135 through the 1000, 2000 and 3000 series to the MF 1200 (compact) and the 8700 S, 5 to 313 kW, Perkins

This page gathers the Massey Ferguson tractors the register could not assign to a named range – from the classics of the 1950s and 1960s such as the MF 35 and MF 135 from Coventry to current compact tractors and big tractors. Massey Ferguson emerged in 1953 from the merger of Massey-Harris (Toronto) with Harry Ferguson's tractor company, whose three-point hydraulics with draft control became the world standard; since 1994 the brand has belonged to AGCO, which builds the tractors in Beauvais, France, and sources the compact class from Iseki in Japan. The brand's type logic changed several times: the three-digit types 130 to 1200 of the 1960s and 1970s order the size in ascending order, the four-digit 1000 to 8000 series of the 1980s to 2000s give the range in the thousands digit and the model in the remaining digits (MF 1250 as compact, MF 3060 as mid-range), and since 2005 two digits mark the range and the last two the power step – MF 5710 as a 5700 with about 100 hp, MF 8737 as an 8700 with about 370 hp; S and the suffix Dyna-VT denote equipment and stepless transmission. The engines come from Perkins (the AD3.152 and 1104 series), AGCO Power (formerly Sisu) in the big and Iseki, Simpson (India) and Kohler in the small models.

Read on 3 more paragraphs

The register lists here 1,011 versions with 5.2 to 313 kW from one- to eight-cylinders of 1,123 to 8,419 cm³, PTO outputs from 19 to 290 hp, lift capacities from 540 to 9,950 kg, unladen weights from 670 to 12,000 kg, lengths from 2,480 to 6,200 mm and widths from 1,003 to 3,000 mm.

By unit numbers Massey Ferguson is one of the world's best-selling tractor brands, with strongholds in Britain, France, Scandinavia, Africa and South Asia, where the MF 240 and its Indian and Pakistani licence builds shape the market.

Used, the span is as wide as the brand: on classics originality and Perkins parts count, on compacts hydrostat and front loader, on the 5700 to 8700 operating hours, Dyna transmissions, electronics and exhaust aftertreatment; parts run through AGCO and Perkins.

Sources: SpecCodex register, model data: Massey Ferguson (weitere Modelle), Massey Ferguson (AGCO, Hersteller)

Technical data

Engine

Rated speed2,200 rpmcorrect
Torque234 Nmcorrect
Cylinders4correct
Displacement3,863 cm³correct

Dimensions and weights

Length3,888 mmcorrect
Width1,980 mmcorrect
Height2,645 mmcorrect

Drivetrain and chassis

Gearbox8V/2R or 12V/4R and 12V/12Rcorrect
Top speed30 km/hcorrect

Working data

Fuel tank capacity108 lcorrect

Other data

Linkage categoryCat I/IIcorrect
PTO speed540/1000 rpmcorrect

Frequently asked questions

What engine does the Massey Ferguson MF 375 have?

4 cylinders, 3,863 cm³ displacement.

How fast does the Massey Ferguson MF 375 go?

Top speed is 30 km/h.

What are the dimensions of the Massey Ferguson MF 375?

3,888 mm × 1,980 mm × 2,645 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare