Massey Ferguson MF 355
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The MF 355 is a tractor from the brand Massey Ferguson. It belongs to the tractor family and is equipped with a power of 53 hp (39 kW). The engine has three cylinders and a displacement of 2,505 cm³. The vehicle measures 3,400 mm in length, 1,800 mm in width and 2,410 mm in height. The gearbox offers eight forward gears and two reverse gears, with a nominal speed of 2,250 rpm and a camshaft speed of 540 rpm (540E).
With a maximum torque of 186 Nm the MF 355 provides enough power to move heavy loads during field work, especially during sowing operations and when using implements. The top speed of 30 km/h allows quick transport between fields, while the 68‑liter tank enables long operation without frequent refuelling. The 8‑gear front‑wheel drive system (8F/2R) provides flexible speed selection and sufficient traction, and the Cat I/II lift category supports lifting light to medium‑heavy loads.
The MF 355 is designed for typical tasks in the medium‑size tractor segment, such as soil cultivation, seed distribution, transport of harvested crops and the use of standard implements. Its dimensions and power data suit farms that need to perform both field work and on‑farm logistical tasks.
Massey Ferguson – other models: the collective page of tractors outside the named ranges, from the MF 35 and 135 through the 1000, 2000 and 3000 series to the MF 1200 (compact) and the 8700 S, 5 to 313 kW, Perkins
This page gathers the Massey Ferguson tractors the register could not assign to a named range – from the classics of the 1950s and 1960s such as the MF 35 and MF 135 from Coventry to current compact tractors and big tractors. Massey Ferguson emerged in 1953 from the merger of Massey-Harris (Toronto) with Harry Ferguson's tractor company, whose three-point hydraulics with draft control became the world standard; since 1994 the brand has belonged to AGCO, which builds the tractors in Beauvais, France, and sources the compact class from Iseki in Japan. The brand's type logic changed several times: the three-digit types 130 to 1200 of the 1960s and 1970s order the size in ascending order, the four-digit 1000 to 8000 series of the 1980s to 2000s give the range in the thousands digit and the model in the remaining digits (MF 1250 as compact, MF 3060 as mid-range), and since 2005 two digits mark the range and the last two the power step – MF 5710 as a 5700 with about 100 hp, MF 8737 as an 8700 with about 370 hp; S and the suffix Dyna-VT denote equipment and stepless transmission. The engines come from Perkins (the AD3.152 and 1104 series), AGCO Power (formerly Sisu) in the big and Iseki, Simpson (India) and Kohler in the small models.
Read on 3 more paragraphs
The register lists here 1,011 versions with 5.2 to 313 kW from one- to eight-cylinders of 1,123 to 8,419 cm³, PTO outputs from 19 to 290 hp, lift capacities from 540 to 9,950 kg, unladen weights from 670 to 12,000 kg, lengths from 2,480 to 6,200 mm and widths from 1,003 to 3,000 mm.
By unit numbers Massey Ferguson is one of the world's best-selling tractor brands, with strongholds in Britain, France, Scandinavia, Africa and South Asia, where the MF 240 and its Indian and Pakistani licence builds shape the market.
Used, the span is as wide as the brand: on classics originality and Perkins parts count, on compacts hydrostat and front loader, on the 5700 to 8700 operating hours, Dyna transmissions, electronics and exhaust aftertreatment; parts run through AGCO and Perkins.
Sources: SpecCodex register, model data: Massey Ferguson (weitere Modelle), Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| Power | 53 hp (39 kW)correct |
|---|---|
| Rated speed | 2,250 rpmcorrect |
| Torque | 186 Nmcorrect |
| Cylinders | 3correct |
| Displacement | 2,505 cm³correct |
Dimensions and weights
| Length | 3,400 mmcorrect |
|---|---|
| Width | 1,800 mmcorrect |
| Height | 2,410 mmcorrect |
Drivetrain and chassis
| Gearbox | 8V/2Rcorrect |
|---|---|
| Forward gears | 8correct |
| Reverse gears | 2correct |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 68 lcorrect |
|---|
Other data
| Linkage category | Cat I/IIcorrect |
|---|---|
| PTO speed | 540/540E rpmcorrect |
Frequently asked questions
How much power does the Massey Ferguson MF 355 have?
The Massey Ferguson MF 355 delivers 53 hp.
What engine does the Massey Ferguson MF 355 have?
3 cylinders, 2,505 cm³ displacement.
How fast does the Massey Ferguson MF 355 go?
Top speed is 30 km/h.
What are the dimensions of the Massey Ferguson MF 355?
3,400 mm × 1,800 mm × 2,410 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
