Massey Ferguson 3050
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Massey Ferguson 3050 belongs to the tractor group of the manufacturer and is a model of the series positioned in the middle size class. It is equipped with a 4‑cylinder engine with a displacement of 3 861 cm³. Technical data include a nominal speed of 2 200 U/min, a maximum torque of 253 Nm and a pump speed of 540/1000 U/min. The transmission provides 32 forward gears (32V/32R) and allows a top speed of 30 km/h. Dimensions are 3 950 mm in length, 1 990 mm in width and 2 620 mm in height, with a fuel tank capacity of 148 l. The lift category is Cat II.
The 32 forward gears enable fine adjustment of working speed, which is important when operating draw‑bar implements because the torque of 253 Nm can be used effectively for pulling power. A top speed of 30 km/h permits rapid travel between fields, while the compact size and relatively low weight reduce ground pressure and improve maneuverability in tight rows. The large 148 l tank allows long operating periods without frequent refuelling, increasing overall productivity.
A tractor of this size and equipment is typically suitable for tasks that require both sufficient pulling power and moderate speed. These include pulling plows and cultivators, transporting harvested material across the field, and operating draw‑bar implements that need precise speed control. The combination of 32 gears, high top speed and large fuel capacity makes it appropriate for a range of field operations in medium‑sized farms.
Massey Ferguson – other models: the collective page of tractors outside the named ranges, from the MF 35 and 135 through the 1000, 2000 and 3000 series to the MF 1200 (compact) and the 8700 S, 5 to 313 kW, Perkins
This page gathers the Massey Ferguson tractors the register could not assign to a named range – from the classics of the 1950s and 1960s such as the MF 35 and MF 135 from Coventry to current compact tractors and big tractors. Massey Ferguson emerged in 1953 from the merger of Massey-Harris (Toronto) with Harry Ferguson's tractor company, whose three-point hydraulics with draft control became the world standard; since 1994 the brand has belonged to AGCO, which builds the tractors in Beauvais, France, and sources the compact class from Iseki in Japan. The brand's type logic changed several times: the three-digit types 130 to 1200 of the 1960s and 1970s order the size in ascending order, the four-digit 1000 to 8000 series of the 1980s to 2000s give the range in the thousands digit and the model in the remaining digits (MF 1250 as compact, MF 3060 as mid-range), and since 2005 two digits mark the range and the last two the power step – MF 5710 as a 5700 with about 100 hp, MF 8737 as an 8700 with about 370 hp; S and the suffix Dyna-VT denote equipment and stepless transmission. The engines come from Perkins (the AD3.152 and 1104 series), AGCO Power (formerly Sisu) in the big and Iseki, Simpson (India) and Kohler in the small models.
Read on 3 more paragraphs
The register lists here 1,011 versions with 5.2 to 313 kW from one- to eight-cylinders of 1,123 to 8,419 cm³, PTO outputs from 19 to 290 hp, lift capacities from 540 to 9,950 kg, unladen weights from 670 to 12,000 kg, lengths from 2,480 to 6,200 mm and widths from 1,003 to 3,000 mm.
By unit numbers Massey Ferguson is one of the world's best-selling tractor brands, with strongholds in Britain, France, Scandinavia, Africa and South Asia, where the MF 240 and its Indian and Pakistani licence builds shape the market.
Used, the span is as wide as the brand: on classics originality and Perkins parts count, on compacts hydrostat and front loader, on the 5700 to 8700 operating hours, Dyna transmissions, electronics and exhaust aftertreatment; parts run through AGCO and Perkins.
Sources: SpecCodex register, model data: Massey Ferguson (weitere Modelle), Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| Rated speed | 2,200 rpmcorrect |
|---|---|
| Torque | 253 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 3,861 cm³correct |
Dimensions and weights
| Length | 3,950 mmcorrect |
|---|---|
| Width | 1,990 mmcorrect |
| Height | 2,620 mmcorrect |
Drivetrain and chassis
| Gearbox | 32V/32Rcorrect |
|---|---|
| Forward gears | 32correct |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 148 lcorrect |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Frequently asked questions
What engine does the Massey Ferguson 3050 have?
4 cylinders, 3,861 cm³ displacement.
How fast does the Massey Ferguson 3050 go?
Top speed is 30 km/h.
What are the dimensions of the Massey Ferguson 3050?
3,950 mm × 1,990 mm × 2,620 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
1 current listings for Massey Ferguson 3050 on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
