Massey Ferguson 1340 S-4
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Massey Ferguson 1340 S-4 is a tractor made by Massey Ferguson. Engine output is 102 kW.
Propulsion comes from MFWD.
The fuel specified is diesel. Within the range, rated power spans from 5.2 to 190 kW; with 102 kW, the 1340 S-4 sits in the upper third. Directly alongside are the 8220 with 101 kW below and the 7475-F36-4X4/278 with 106 kW above.
Technical data
Engine
| Engine make | Perkinscorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 137 hp (102 kW)correct |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Rosario Santa Fe, Argentinacorrect |
|---|
Frequently asked questions
How much power does the Massey Ferguson 1340 S-4 have?
The Massey Ferguson 1340 S-4 delivers 137 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.