Massey Ferguson MF 690 ( Turbo )
Built: 1982–1986 ( Turbo: 1985 ) · Series: 600 er - Serie
More machines from model year 1982
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Massey Ferguson 600 series – five versions from the MF 675 to the MF 699 from Coventry and Beauvais, four- and six-cylinder engines of 50 to 70 kW, torque of 270 to 354 Nm
The MF 600 series was a Massey Ferguson range of the 1980s, built at the Coventry and Beauvais plants; it runs from the MF 675 through the MF 690 (Turbo) and MF 698 to the MF 698 Turbo and MF 699. The Turbo variants used turbocharging for a higher power step, while the six-cylinder models marked the top end of the range.
Read on 3 more paragraphs
The register lists here five versions with 50 to 70 kW from four- or six-cylinder engines of 3,860 to 5,797 cm³ displacement, torque from 270 to 354 Nm, lift capacities from 1,800 to 3,700 kg, unladen weights from 3,030 to 4,075 kg, lengths from 3,910 to 4,240 mm and heights from 2,660 to 2,750 mm at rated speeds of 2,000 to 2,200 rpm.
In this power class the 600 series competed with comparable ranges from Ford, David Brown/Case and John Deere, serving as a versatile field tractor for medium and larger farms, some with four-wheel drive and a cab in higher trim.
When buying used, the condition of the turbocharger and charge-air ducting on the Turbo models, the clutch and gearbox, hydraulic tightness and corrosion on the cab frame and wings matter; engine and wear parts are available through the AGCO parts network for Massey Ferguson. For contractors and larger arable farms, the range offered an economical alternative to the even larger tractors from competitors. Cab mounts and exhaust systems are also worth checking for corrosion after years of field use.
Sources: SpecCodex register, model data: Massey Ferguson 600er-Serie, Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 80 hp (59 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,060 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,960 mmcorrect |
|---|---|
| Height | 2,730 mmcorrect |
| Wheelbase | 2,290 mmcorrect |
| Unladen weight | 3,210 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 12V / 4Rcorrect |
| Front tyres | 10.00 - 16 ( A = 13.6 - 24 )correct |
| Rear tyres | 16.9 - 34 ( A = 18.4 - 34 )correct |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 18.4 kW/t (59 kW / 3.2 t)
Power class: Universal (40–100 hp)
Stronger than 55% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Massey Ferguson MF 690 ( Turbo ) have?
The Massey Ferguson MF 690 ( Turbo ) delivers 80 hp.
How much does the Massey Ferguson MF 690 ( Turbo ) weigh?
The unladen weight is 3,210 kg.
What engine does the Massey Ferguson MF 690 ( Turbo ) have?
4 cylinders, 4,060 cm³ displacement, Diesel.
How fast does the Massey Ferguson MF 690 ( Turbo ) go?
Top speed is 30 km/h.
What are the dimensions of the Massey Ferguson MF 690 ( Turbo )?
3,960 mm × 2,730 mm.
When was the Massey Ferguson MF 690 ( Turbo ) built?
Production years: 1982–1986 ( Turbo: 1985 ).
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
