Massey Ferguson 2746A Autocycle
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| PTO power required | 48.5 kWcorrect |
|---|
Dimensions and weights
| Length | 3,770 mmcorrect |
|---|---|
| Height | 2,920 mmcorrect |
| Unladen weight | 2,776 kgcorrect |
Working data
| Number of tines | 96correct |
|---|---|
| Twine rolls | 8correct |
| Number of knife bars | 4correct |
| Twine tying | Automatic - Electric Actuatedcorrect |
| Number of belts | 6correct |
| Belt width | 177.8 mmcorrect |
| Max. bale weight | 997.9 kgcorrect |
Other data
| Ballengewicht min kg | 745.7 kgcorrect |
|---|
Frequently asked questions
How much does the Massey Ferguson 2746A Autocycle weigh?
The unladen weight is 2,776 kg.
What are the dimensions of the Massey Ferguson 2746A Autocycle?
3,770 mm × 2,920 mm.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.