Massey Ferguson MF 2645
Built: 1985–1986 · Series: 2005er-Baureihe
More machines from model year 1985
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Massey Ferguson 2625 to 2725 – the 2005 series from Beauvais: six-cylinders of 5,797 cm³, 95 to 147 hp, up to 6,100 kg unladen weight
The MF 2625, MF 2645, MF 2685 and MF 2725 form the Massey Ferguson 2005 series, built as the next generation after the 2000 series, also in Beauvais. Like their predecessors, all four models carry the six-cylinder block of 5,797 cm³; the last two digits of the type code – 25, 45, 85, 25 – order the power step within the range. Beauvais had already built Massey Ferguson's earlier six-cylinder ranges, so the 2005 series could draw on established engine and transmission production.
Read on 3 more paragraphs
The register lists 4 versions with 69.9 to 108.2 kW, or 95 to 147 hp, from six-cylinders of a consistent 5,797 cm³. Unladen weights range from 5,450 to 6,100 kg, widths from 2,320 to 2,420 mm and heights from 2,880 to 2,960 mm at a uniform length of 5,080 mm; torque sits between 365 and 493 Nm at rated speeds of 2,100 to 2,400 rpm, all with diesel engines.
The 2005 series replaced the second generation of the 2000 series and stayed in the same big-tractor class between the 200 series and the articulated 4000 series; in Europe it competed directly with the big models from Case IH, John Deere and Fendt.
On used examples of the 2005 series, injection-pump and turbocharger condition, transmission and shuttle shift, hydraulic output for heavy mounted implements and rust on cab and mudguards count, plus front-axle suspension on suitably equipped models; parts run through the AGCO network.
Sources: SpecCodex register, model data: Massey Ferguson 2005er-Baureihe, Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 110 hp (81 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Torque | 367 Nmcorrect |
| Speed at max. torque | 1,400 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 5,797 cm³correct |
| Bore | 98.48 mmcorrect |
| Stroke | 127 mmcorrect |
| Injection pressure | 180 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 5,080 mmcorrect |
|---|---|
| Width | 2,320 mmcorrect |
| Height | 2,880 mmcorrect |
| Wheelbase | 2,726 mmcorrect |
| Ground clearance | 470 mmcorrect |
| Unladen weight | 5,630 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 16V/12Rcorrect |
| Forward gears | 16correct |
| Reverse gears | 12correct |
| Front tyres | 14.9/13-28 AScorrect |
| Rear tyres | 18.4/15-38 AScorrect |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 213 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| Linkage category | Cat II/IIIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 14.4 kW/t (81 kW / 5.6 t)
Power class: Large (100–180 hp)
Stronger than 71% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Massey Ferguson MF 2645 have?
The Massey Ferguson MF 2645 delivers 110 hp.
How much does the Massey Ferguson MF 2645 weigh?
The unladen weight is 5,630 kg.
What engine does the Massey Ferguson MF 2645 have?
6 cylinders, 5,797 cm³ displacement, Diesel.
How fast does the Massey Ferguson MF 2645 go?
Top speed is 30 km/h.
What are the dimensions of the Massey Ferguson MF 2645?
5,080 mm × 2,320 mm × 2,880 mm.
When was the Massey Ferguson MF 2645 built?
Production years: 1985–1986.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 30 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
