Massey Ferguson 1756 – specifications
Series: Other models
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Massey Ferguson – further versions: the collector page outside the named series, with Activa, Beta and the types of the 1700 to 2900 range, 190 to 227 kW, 5,801 to 8,400 cm³ displacement, up to 13.7 tonnes
This page brings together Massey Ferguson versions that the register does not assign to a named series – from the three-digit types MF 135, MF 137 and MF 139, through the four-digit ranges 1734 to 2956A, to the Activa and Beta ranges. Massey Ferguson was formed in 1953 from the merger of Massey-Harris with Harry Ferguson's tractor company and has belonged to AGCO since 1994. Unlike the brand's pure tractor ranges, the versions listed here are self-propelled agricultural machines with their own engine, carrying engine designations such as NEF, 84 ETA and 74 ETA.
Read on 3 more paragraphs
The register lists 33 versions here with outputs from 190.2 to 227.4 kW, displacements from 5,801 to 8,400 cm³, weights from 227 to 13,689 kg, lengths from 1,600 to 9,830 mm, widths from 1,630 to 3,200 mm and heights from 1,650 to 3,680 mm.
With weights from a few hundred kilograms to almost 13.7 tonnes and outputs over 300 hp, this page covers a very wide span, from smaller mounted implements to heavy self-propelled machines; Massey Ferguson thereby positions itself alongside the established agricultural machinery brands as a full-range supplier, from tractor accessories to large machinery.
On the heavy, self-propelled versions, the main points are operating hours, the condition of the engine and hydraulics, wear on tracks or tyres, and corrosion on the frame; on the lighter, implement-like types, rather the condition of the mounting points and the movement of the joints. Parts for Massey Ferguson run through the AGCO dealer network.
Sources: SpecCodex register, model data: Massey Ferguson (weitere Ausführungen), Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| PTO power required | 52.2 kWcorrect |
|---|
Dimensions and weights
| Length | 4,120 mmcorrect |
|---|---|
| Height | 3,000 mmcorrect |
| Unladen weight | 2,440.3 kgcorrect |
Working data
| Number of tines | 96correct |
|---|---|
| Twine rolls | 4correct |
| Number of knife bars | 4correct |
| Twine tying | AutoTie - Electric Actuatedcorrect |
| Number of belts | 8correct |
| Belt width | 177.8 mmcorrect |
Other data
| Ballengewicht min kg | 952.5 kgcorrect |
|---|
Frequently asked questions
How much does the Massey Ferguson 1756 weigh?
The unladen weight is 2,440 kg.
What are the dimensions of the Massey Ferguson 1756?
4,120 mm × 3,000 mm.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
