Marco A 35 T – specifications
Built: 1996 · Series: Other models
Data for the version built 1996 · Data origin: Official register · sources
More machines from model year 1996
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Marco – other models: the collective page of trailers outside the named ranges, types from AV 15 T to AV 20 TA, unladen weights 630 to 1,850 kg, gross weights up to 3,500 kg (class O2)
Marco builds light to medium commercial trailers in the segment up to 3.5 tonnes gross weight; type names such as AV 15 T or AV 20 TA combine a range code with figures, while S35.3 and VAM 1200 denote individual execution variants. This page gathers the models the register could not assign to a named range.
Read on 3 more paragraphs
The register lists here 8 versions with unladen weights from 630 to 1,850 kg, gross weights from 1,200 to 3,500 kg and widths from 1,800 to 2,550 mm at a length of 4,500 mm.
By gross weight, all models fall within vehicle class O2 for trailers of 0.75 to 3.5 tonnes and suit haulage tasks in trades, landscaping and smaller hauliers that can be driven on a category B or BE licence. The uniform width close to the permitted road width of 2.55 metres allows practically the whole Marco range to be driven on public roads without a special permit.
On a used example, the condition of the overrun coupling and brake cables counts, along with rust on the frame and load floor, the tightness of the side panels, and tyre condition and lighting; spare parts for axles and couplings are in this size class usually available independent of the maker and the condition of the ball coupling, the electrical plug, the lighting wiring, the mudguard fixings and the condition of the safety chain where one is fitted..
Sources: SpecCodex register, model data: Marco (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,460 mmcorrect |
|---|---|
| Coupling-to-axle distance | 740 mmcorrect |
| Unladen weight | 1,170 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Marco A 35 T weigh?
The unladen weight is 1,170 kg.
What is the gross vehicle weight of the Marco A 35 T?
3,500 kg.
Up to what speed is the Marco A 35 T approved?
Approved up to 100 km/h.
When was the Marco A 35 T built?
Production years: 1996.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
