Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Marathon › HJN › HJN 250Mx-2

Marathon HJN 250Mx-2

Series: HJN

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The HJN 250Mx-2 belongs to the HJN series from Marathon. The rated output is 75 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 400 V. The housing is frame size 250 M in foot-mounted form. The protection class is IP55. The efficiency is 95.3 per cent at full load, 95.1 per cent at 75 per cent load and 94.3 per cent at half load. The mounting arrangement to IEC 60034-7 is B5. The motor is built in China. The figures come from the Australian MEPS register under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). The HJN series covers 10 models. Rated output within it ranges from 11 to 160 kW; the HJN 250Mx-2 sits in the middle of that range with 75 kW. Its immediate neighbours are the HJN 200Ly-2 below it with 45 kW and the HJN 280M-2 above it with 90 kW. 499 Marathon models across 3 series are on record.

Marathon HJN – electric motor range: frame sizes 132 to 315, 11 to 160 kW, 2- to 4-pole, 400/415 V, all rated at High Efficiency Level 2005 (IE2), MEPS registration

Marathon Electric, according to the company's own history founded in 1893 in Wausau, Wisconsin, has belonged since 2021 to Regal Rexnord, the US drive-technology group formed from the merger of Regal Beloit with parts of Rexnord. This page covers the HJN range, whose type designations begin with the IEC frame size (132, 160, 180, 200, 250, 280, 315), followed by the construction form (M, L) and the pole count; the additional letters x, y and the digit 2 on the larger frame sizes distinguish variants of the same frame size but a different power step.

Read on 3 more paragraphs

The register lists here 10 versions with 11 to 160 kW, two- to four-pole, at voltages of 400 to 415 V. Full-load efficiencies range from 91.8 to 95.9%, and at 75% load from 91.7 to 95.9%. Frame sizes run from 132 to 315, protection and mounting are uniform at IP55 and B5. Manufacturing is exclusively in China, testing followed the 2019 GEMS determination with test method A; all ten motors reach the 2005 High Efficiency Level, roughly equivalent to class IE2.

The HJN range thus covers the mid to large power segment of the Marathon programme, used for pumps, fans, compressors and conveying plant in industry and agriculture; within the Regal Rexnord group the brand stands, alongside Leeson and Rexnord, for drive technology for the North American and Australia-Pacific markets.

When buying used, bearing condition and a checked insulation resistance of the winding, visible overheating marks on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, pole count and the High Efficiency Level marking all matter. Spares and service run through the Regal Rexnord network.

Sources: SpecCodex register, model data: Marathon HJN

Technical data

Engine

Rated output75 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size250 M (foot)correct
Mounting (IEC 60034-7)B5correct
Efficiency at full load95.3 %correct
Efficiency at 75 % load95.1 %correct
Efficiency at half load94.3 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Marathon HJN 250Mx-2 have?

The Marathon HJN 250Mx-2 delivers 75 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare