Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Manitou › Other models › MANISCOPIC MLT 735-120 LSU

Manitou MANISCOPIC MLT 735-120 LSU

Built: 2012 · Series: Other models

More machines from model year 2012

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Manitou MANISCOPIC MLT 735-120 LSU is a machine built by Manitou. Production: 2012. The engine delivers 91 kW, has 4 cylinders, with a displacement of 4,400 cm³. The machine is 4,805 mm long and 2,400 mm wide. The unladen weight is 7,010 kg. The gross vehicle weight is 9,050 kg. Rated output across the Manitou range ranges from 8.7 to 159.1 kW; the MANISCOPIC MLT 735-120 LSU sits in the middle of that range with 91 kW. Its immediate neighbours are the MLA 628 - 120 LSU Powershift TS below it with 90.5 kW and the MLT 737 130 PS ST4 above it with 95 kW. Unladen weight across the Manitou range ranges from 1,154.4 to 28,350 kg; here the MANISCOPIC MLT 735-120 LSU sits in the lower part of that range with 7,010 kg. 731 Manitou models across 35 series are on record.

Manitou – other models: the collective page of telehandlers registered as a tractor outside the named ranges, from the MLA-T 533 to the Maniscopic MLT 735-120, 74 to 105 kW, four-cylinder diesel engines

This page gathers the Manitou vehicles the register could not assign to a named range – telehandlers from the French manufacturer based in Ancenis, listed in registration records as a tractor. The type logic: MLT stands for a Manitou telehandler with a classic cab, MLA-T for the version with four-wheel steering, MVT for the version with stepless transmission; the following number gives lift height and capacity (MLT634-120PS roughly 6 m lift height and 3.4 t capacity), V+ and PS mark engine and transmission variants.

Read on 3 more paragraphs

The register lists here 7 versions with 74.4 to 105 kW from four-cylinders of 3,621 to 4,400 cm³, unladen weights from 6,400 to 9,115 kg, gross weights from 8,450 to 10,500 kg, lengths from 4,579 to 6,200 mm and widths from 2,180 to 2,402 mm.

Manitou is one of the leading telehandler makers, present on building sites, in agriculture and in industry; the models registered as a tractor allow different licence and insurance rules than registration as a plain construction machine. The register's classification as a tractor concerns only the registration, not the machine's constructional function as a telehandler.

On used examples, the condition of the telescopic boom for play and cracking, the tightness of the hydraulic cylinders, wear of the propshafts and axles, the brakes and the engine condition all count; parts run through the Manitou dealer network.

Sources: SpecCodex register, model data: Manitou (weitere Modelle), Manitou (manufacturer)

Technical data

Engine

Power91 kWcorrect
Cylinders4correct
Displacement4,400 cm³correct

Dimensions and weights

Length4,805 mmcorrect
Width2,400 mmcorrect
Unladen weight7,010 kgcorrect
Gross vehicle weight9,050 kgcorrect

Where this model stands

Power-to-weight ratio: 13 kW/t (91 kW / 7 t)

Power class: Large (100–180 hp)

Stronger than 76% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Manitou MANISCOPIC MLT 735-120 LSU have?

The Manitou MANISCOPIC MLT 735-120 LSU delivers 91 kW.

How much does the Manitou MANISCOPIC MLT 735-120 LSU weigh?

The unladen weight is 7,010 kg.

What is the gross vehicle weight of the Manitou MANISCOPIC MLT 735-120 LSU?

9,050 kg.

What engine does the Manitou MANISCOPIC MLT 735-120 LSU have?

4 cylinders, 4,400 cm³ displacement.

What are the dimensions of the Manitou MANISCOPIC MLT 735-120 LSU?

4,805 mm × 2,400 mm.

When was the Manitou MANISCOPIC MLT 735-120 LSU built?

Production years: 2012.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare