Manitou MT 1335 75D ST5 S1
Series: Manitou Teleskopstapler-Starr
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Manitou Teleskopstapler-Starr – fixed-boom telehandlers of the MT, MLT and MHT ranges: load capacities from 1,200 to 25,000 kg, example powertrain 85 kW at 3,621 cm³, operating weight from 7,165 kg
Manitou, based in Ancenis, France, is one of the world's leading makers of telehandlers; this page gathers the fixed, non-slewing models from the MHT, MLT, MRT (in its fixed build), MT ranges and other variants that the register could not assign to a named range. On these machines the boom is fixed to the chassis, so lift height and reach come only from the telescopic movement and the boom's angle.
Read on 3 more paragraphs
The register lists here 105 versions with load capacities from 1,200 to 25,000 kg, an engine output of 85 kW at 3,621 cm³ displacement, an operating weight of 7,165 kg, a gross vehicle weight of 9,500 kg, a length of 4,808 mm and a width of 2,392 mm.
Fixed-boom telehandlers are versatile work machines for agriculture, construction and industry, where they take pallets, buckets, forks or work platforms, combining forklift, wheel loader and crane duties in a single machine. Manitou competes here with makers such as JCB, Merlo and Bobcat, which also run broad telehandler ranges.
On a used example, the condition of the telescopic slide guides and wear pads inside the boom, the tightness of the lift and tilt cylinders, wear on the axles and four-wheel steering, and the condition of the attachment plate and quick-hitch all matter; spare parts and service run through Manitou's dense dealer network.
Sources: Kennwerte der Modelle Manitou Teleskopstapler-Starr, Manitou
Technical data
Working data
| Lifting capacity | 3,500 kgcorrect |
|---|---|
| Lift height | 12,600 mmcorrect |
| Mast type | telescopiccorrect |
Frequently asked questions
What is the load capacity of the Manitou MT 1335 75D ST5 S1?
Load capacity is 3,500 kg, lift height 12,600 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 3 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
MHT 10130 (Rental only)
MHT 10135
MHT 10135175Y
MHT 10160, 1500mm Gabeln
MHT 10160, 2400mm Gabeln
MHT 11250
MHT 780
MHT 790
MHT 790 ST4
MLT 1041-145 PS+ L Y ST5 S1
MLT 420 H Classic
MLT 420 H Premium
Sources: [1]
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.