Manitou MRT 2550 PRIVILEGE+ ST4 S2
Series: Manitou Teleskopstapler-Rotor
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Manitou Teleskopstapler-Rotor – slewing telehandlers of the MRT range: load capacities from 1,500 to 7,000 kg for 360-degree work without repositioning the machine
Manitou, based in Ancenis, France, runs the slewing MRT range alongside its fixed-boom telehandlers; this page gathers models such as the MLT733, MRT 1840, MRT 2145, MRT 2660, MT1440A and further variants that the register could not assign to a named range. Unlike fixed-boom telehandlers, the upper structure here can rotate through 360 degrees, so the machine can lift, slew and set down a load without changing its own position.
Read on 3 more paragraphs
The register lists here 40 versions with load capacities from 1,500 to 7,000 kg.
Slewing telehandlers thereby take on tasks that would otherwise need a mobile crane, such as moving components on scaffolding, erecting roof trusses, or lifting work on tight sites where a crane could not manoeuvre. Manitou competes in this segment mainly against JCB and its own rotating telehandlers. Four extending outriggers stabilise the machine when the boom is extended and the upper structure slewed, allowing loads to be lifted even to the side of the chassis.
On a used example, the condition of the slew ring and its gearing, the tightness of the outrigger cylinders and their hydraulics, wear on the telescopic guides inside the boom, and the function of the electronic load-moment limiter all matter; spare parts and service run through the Manitou dealer network, which also covers the hydraulic load-moment sensors specific to the slewing models.
Sources: Kennwerte der Modelle Manitou Teleskopstapler-Rotor, Manitou
Technical data
Working data
| Lifting capacity | 5,000 kgcorrect |
|---|---|
| Lift height | 24,700 mmcorrect |
| Mast type | telescopiccorrect |
Frequently asked questions
What is the load capacity of the Manitou MRT 2550 PRIVILEGE+ ST4 S2?
Load capacity is 5,000 kg, lift height 24,700 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 3 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
MLT733
MLT737-130PS+ ELITE ST5
MLT840-137PS ELITE
MLT841-145PS+ ELITE ST5
MRT 1640 Easy
MRT 1840
MRT 1840-400°Easy
MRT 1840Easy
MRT 1845 360 115D ST5 S1
MRT 1845 400 75D ST5 S1
MRT 1845 Vision- incl. Kranhaken und Winde
MRT 1850 PRIVILEGE
Sources: [1]
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.