Manitou MHT 10160, 2400mm Gabeln
Series: Manitou Teleskopstapler-Starr
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Manitou Teleskopstapler-Starr – fixed-boom telehandlers of the MT, MLT and MHT ranges: load capacities from 1,200 to 25,000 kg, example powertrain 85 kW at 3,621 cm³, operating weight from 7,165 kg
Manitou, based in Ancenis, France, is one of the world's leading makers of telehandlers; this page gathers the fixed, non-slewing models from the MHT, MLT, MRT (in its fixed build), MT ranges and other variants that the register could not assign to a named range. On these machines the boom is fixed to the chassis, so lift height and reach come only from the telescopic movement and the boom's angle.
Read on 3 more paragraphs
The register lists here 105 versions with load capacities from 1,200 to 25,000 kg, an engine output of 85 kW at 3,621 cm³ displacement, an operating weight of 7,165 kg, a gross vehicle weight of 9,500 kg, a length of 4,808 mm and a width of 2,392 mm.
Fixed-boom telehandlers are versatile work machines for agriculture, construction and industry, where they take pallets, buckets, forks or work platforms, combining forklift, wheel loader and crane duties in a single machine. Manitou competes here with makers such as JCB, Merlo and Bobcat, which also run broad telehandler ranges.
On a used example, the condition of the telescopic slide guides and wear pads inside the boom, the tightness of the lift and tilt cylinders, wear on the axles and four-wheel steering, and the condition of the attachment plate and quick-hitch all matter; spare parts and service run through Manitou's dense dealer network.
Sources: SpecCodex register, model data: Manitou Teleskopstapler-Starr, Manitou
Technical data
Working data
| Lifting capacity | 16,000 kgcorrect |
|---|---|
| Lift height | 9,600 mmcorrect |
Frequently asked questions
What is the load capacity of the Manitou MHT 10160, 2400mm Gabeln?
Load capacity is 16,000 kg, lift height 9,600 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 2 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
MHT 10130 (Rental only)
MHT 10135
MHT 10135175Y
MHT 10160, 1500mm Gabeln
MHT 11250
MHT 780
MHT 790
MHT 790 ST4
MLT 1041-145 PS+ L Y ST5 S1
MLT 420 H Classic
MLT 420 H Premium
MLT 625
Sources: [1]
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.