StartTractorsMancini › 8180

Mancini 8180

Built: 1990-1990 · Series: Other models

More machines from model year 1990

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mancini 8180 is a tractor built in 1990. The six-cylinder engine produces 130 kW.

It is powered by diesel. Within the range, rated power spans from 120 to 220 kW; with 130 kW, the 8180 sits in the lower third. Directly alongside are the 7160 with 120 kW below and the 7219 with 160 kW above.

Technical data

Engine

Engine makeCumminscorrect
Engine model6.CT 8.3correct
Fueldieselcorrect
Power180 hp (130 kW)correct
Cylinders6correct

Drivetrain and chassis

Drivefour-wheel driveWDcorrect
Forward gears20correct
Reverse gears4correct

Origin and approval

PlantCordoba, Argentinacorrect

More machines with this engine (Cummins 6.CT 8.3, 2)

Frequently asked questions

How much power does the Mancini 8180 have?

The Mancini 8180 delivers 180 hp.

What engine does the Mancini 8180 have?

6 cylinders, Diesel.

When was the Mancini 8180 built?

Production years: 1990.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare