MAN 10.185 LLC
Built: 2001-2001 · Series: 10.185
More machines from model year 2001
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MAN 10.185 – a 10-tonne-class chassis from the F8/L2000 generation: 4.58-litre engine, 132 kW, around 185 PS factory rating, chassis and flatbed variants up to 10.6 tonnes
Like the 10.163, the 10.185 belongs to MAN's medium-duty F8/L2000 range under the weight class.engine power designation scheme: the 10 denotes the 10-tonne weight class, the 185 the engine output in metric horsepower. Compared with the 10.163, the 10.185 is the higher-output variant with the same 4.58-litre engine block, built by MAN Nutzfahrzeuge in Munich.
Read on 3 more paragraphs
The register lists 5 versions with 132 kW from 4,580 cm³ displacement, kerb weights of 5,050 to 8,500 kg, gross vehicle weights of 10,500 to 10,600 kg, lengths of 6,950 to 8,020 mm and widths of 2,420 to 2,550 mm.
The higher output made the 10.185 the preferred choice for chassis with heavier bodies such as box bodies with tail lifts or tippers, while the 10.163 tended to serve lighter-duty roles; both variants shared chassis, axles and cab and competed with the Mercedes-Benz LK/LN2 and Iveco Eurocargo in distribution haulage; fleets running both variants side by side benefited from shared chassis and cab parts.
When buying used, check for rust on the frame and mounted components, clutch condition on trucks with frequent load changes, and brakes and suspension relative to usage history. The 4.58-litre four-cylinder engine is considered robust and easy to repair; parts are supplied through the MAN dealer workshop network, and for the drivetrain also through independent commercial-vehicle parts dealers.
Sources: Kennwerte der Modelle MAN 10.185, MAN Truck & Bus (Hersteller)
Technical data
Engine
| Power | 132 kWcorrect |
|---|---|
| Displacement | 4,580 cm³correct |
Dimensions and weights
| Length | 8,020 mmcorrect |
|---|---|
| Width | 2,420 mmcorrect |
| Unladen weight | 6,300 kgcorrect |
| Gross vehicle weight | 10,600 kgcorrect |
Where this model stands
Power-to-weight ratio: 21 kW/t (132 kW / 6.3 t)
Stronger than 15% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the MAN 10.185 LLC have?
The MAN 10.185 LLC delivers 132 kW.
How much does the MAN 10.185 LLC weigh?
The unladen weight is 6,300 kg.
What is the gross vehicle weight of the MAN 10.185 LLC?
10,600 kg.
What engine does the MAN 10.185 LLC have?
4,580 cm³ displacement.
What are the dimensions of the MAN 10.185 LLC?
8,020 mm × 2,420 mm.
When was the MAN 10.185 LLC built?
Production years: 2001.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.