Mahindra Yueda (yancheng) Tractor Co, Ltd 164Y
Built: unknown–unknown · Series: HHJM
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mahindra Yueda 164Y (HHJM series): water-cooled three-cylinder diesel engine of 1,123 cc, rated at 16 hp (11.76 kW) at 2,400 rpm, a compact tractor from the Sino-Indian joint venture
Mahindra Yueda (Yancheng) Tractor Co., Ltd. is a joint venture between the Indian Mahindra group and the Chinese Yueda group, based in Yancheng in Jiangsu province and specialising in compact agricultural tractors for the Chinese and export markets. The 164Y belongs to the HHJM series, in the lower power segment.
Read on 3 more paragraphs
The 164Y is driven by a water-cooled three-cylinder diesel engine of 1,123 cc displacement, rated at 16 hp (11.76 kW) at 2,400 rpm. Unladen weight is 802 kg, wheelbase 1,290 mm, width 1,050 mm, height 1,220 mm and length 2,590 mm. Top speed is 13.94 km/h.
At 16 hp and an unladen weight under a tonne, the 164Y sits in the class of small tractors used in vegetable and fruit growing, on smaller plots and in narrow row spacings where larger machines have no room. Its compact dimensions and nimble three-cylinder engine suit work between tree rows or inside greenhouses.
When buying such a compact tractor, check the power take-off and hydraulics for leaks, the steering for play given the narrow track, and the tyres for even wear, since small tractors often work on uneven ground. Parts are supplied through Mahindra's distribution partners, who also serve the manufacturer's other compact models. It is also worth confirming that the three-point linkage lifts and holds evenly, since this compact class is frequently fitted with a wide range of small implements.
Sources: SpecCodex-Register: Kennwerte des Modells Mahindra Yueda 164Y
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 16 hp (11.76 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,123 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 2,590 mmcorrect |
|---|---|
| Width | 1,050 mmcorrect |
| Height | 1,220 mmcorrect |
| Wheelbase | 1,290 mmcorrect |
| Ground clearance | 248 mmcorrect |
| Unladen weight | 802 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 2x (3+1) nicht synchronisiertcorrect |
| Front tyres | 5.00-12 PR6correct |
| Rear tyres | 7.50-16 PR8correct |
| Top speed | 13.94 km/hcorrect |
Origin and approval
| Construction | Schmalspurtraktor, Kleintraktorcorrect |
|---|---|
| Units built | unbekanntcorrect |
Where this model stands
Power-to-weight ratio: 14.7 kW/t (12 kW / 0.8 t)
Power class: Compact (< 40 hp)
Stronger than 4% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mahindra Yueda (yancheng) Tractor Co, Ltd 164Y have?
The Mahindra Yueda (yancheng) Tractor Co, Ltd 164Y delivers 16 hp.
How much does the Mahindra Yueda (yancheng) Tractor Co, Ltd 164Y weigh?
The unladen weight is 802 kg.
What engine does the Mahindra Yueda (yancheng) Tractor Co, Ltd 164Y have?
3 cylinders, 1,123 cm³ displacement, Diesel.
How fast does the Mahindra Yueda (yancheng) Tractor Co, Ltd 164Y go?
Top speed is 13.9 km/h.
What are the dimensions of the Mahindra Yueda (yancheng) Tractor Co, Ltd 164Y?
2,590 mm × 1,050 mm × 1,220 mm.
When was the Mahindra Yueda (yancheng) Tractor Co, Ltd 164Y built?
Production years: unbekannt–unbekannt.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
