Lohr C2H292
Built: 1999 · Series: Other models
More machines from model year 1999
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lohr – other models: the collective page of French car-transporter trailers outside the named TA and SMC ranges, to Multilohr, 1.04 to 15.72 t unladen weight, up to 83.5 t gross weight, lengths up to 17.22 m
This page gathers the Lohr trailers the register could not assign to a named range – trailers and bodies from the French car-transport specialist Lohr Industrie of Alsace, whose Multilohr system is known as a folding vehicle-transport body. Type codes such as TA 10/4, SMC 60-6.3 D B or C2H99S6 combine axle count, payload class and body variant, with the TA range denoting lighter trailers and the SMC and C ranges bodies for vehicle-transport and special combinations.
Read on 3 more paragraphs
The register lists here 39 versions with unladen weights from 1,040 to 15,720 kg, gross weights from 2,500 to 83,500 kg, lengths up to 17,220 mm and widths from 2,150 to 3,350 mm.
Lohr is one of the leading makers of car-transport vehicles in Europe and supplies hauliers that move new and used vehicles to dealers and auctions; the Multilohr system allows several vehicles to be loaded space-efficiently onto a combination of tractor unit and trailer; besides new cars, the combinations also move used vehicles between auction houses and workshops.
On a used example, the condition of the folding and lifting mechanism of the load decks, hydraulics and cables, axles, brakes and air suspension, frame and ramps for rust and wear, tyre condition and the electrical connections to the tractor unit, and a complete service history count; spare parts run through the Lohr service network.
Sources: SpecCodex register, model data: Lohr (weitere Modelle)
Technical data
Dimensions and weights
| Length | 12,000 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 7,970 mmcorrect |
| Unladen weight | 7,880 kgcorrect |
| Gross vehicle weight | 17,480 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Lohr C2H292 weigh?
The unladen weight is 7,880 kg.
What is the gross vehicle weight of the Lohr C2H292?
17,480 kg.
Up to what speed is the Lohr C2H292 approved?
Approved up to 100 km/h.
What are the dimensions of the Lohr C2H292?
12,000 mm × 2,500 mm.
When was the Lohr C2H292 built?
Production years: 1999.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.